My Blog

Process for Making Powdery Organic Fertilizer from chicken Manure

• What equipment does fresh chicken manure need to make fertilizer? Generally speaking, the complete equipment of chicken manure organic fertilizer production line is mainly composed of fermentation system, drying system, deodorization and dust removal system, crushing system, batching system, mixing system, granulation system, It consists of a screening system and a finished product packaging system.
• After the fermented and decomposed chicken manure is sent to the pulverizer by the conveyor for pulverization, the material with a fineness of 80 mesh accounts for more than 65%, and is sent to the organic raw material warehouse through the conveyor belt, and enters together with other raw materials (nitrogen, phosphorus and potassium) after electronic measurement. The raw material pulverizer performs secondary pulverization and mixing, and the pulverized and mixed materials are sent to the drum fertilizer granulator through the belt conveyor. The self-viscosity is stimulated. Under the continuous rolling of the drum granulator, the material gradually rolls into a ball, which flows out from the tail of the granulator and is sent to the disc granulator through the belt conveyor. In the long-distance granulation area, the granules are continuously lifted to a high place and rolled down under the action of gravity. The cycle is repeated, the strength of the granules is further strengthened, and the appearance of the granules is more rounded. As the number of particles in the disc fertilizer granulator gradually increases, the finished product The granules overflow out of the granulation tray, and are sent to the dryer through the belt conveyor. The hot air in the hot blast stove is introduced into the dryer through the induced draft fan, and fully contacts the organic fertilizer granules entering the dryer, and the moisture in the granules is quickly removed. After the exchange, a large amount of water vapor is introduced into the dust chamber by the induced draft fan, and then emptied after dust removal and water washing.

fertilizer rotary drum granulator

• The temperature of the particles after drying is about 70 degrees. It flows out through the tail of the dryer and then enters the cooler for cooling. The normal temperature air introduced by the induced draft fan is fully contacted with the high-temperature particles in the cooler, and the temperature of the high-temperature particles is gradually cooled. When it reaches normal temperature, the hot and humid air in the cooler is introduced into the dust chamber by the induced draft fan, and then emptied after dust removal and water washing. The organic fertilizer particles cooled to room temperature flow out from the end of the cooler and enter the screening machine. Under the continuous rolling action of the granules screening machine, the unscreened organic fertilizer passes through the fine screen section of the screening machine (pore size 2.5*2.5) and the finished product screen in turn. In the mesh segment (pore size 4.5*4.5), the organic fertilizer is divided into three specifications: fine return material, finished pellets and large pellets. The fine return material and the crushed large pellets are returned to the granulator through the return belt conveyor for re-making. The finished granules are sent into the coating machine through the belt conveyor, and are fully contacted and mixed with the coated oil or functional bacteria that are metered into the granular fertilizer coater. The coated oil or functional bacteria are evenly wrapped and adsorbed on the surface of the organic fertilizer particles. , and then enter the finished product warehouse, after being measured by the electronic measuring&packaging machine, it is sent to the packaging machine for packaging and sealing, and then enters the finished product warehouse for storage.

What equipment is used for processing chicken manure into organic fertilizer? What is the process? FPC is a professional organic fertilizer equipment manufacturer. Today I will share with you what equipment is used for processing chicken manure into organic fertilizer, and what is the treatment process? what.

Long-term use of chicken manure organic fertilizer can make crops and plant rhizomes develop, and plants grow well and shiny, and can also increase the yield of crops. The more feasible way to process chicken manure into organic fertilizer is to use organic fertilizer equipment for process treatment, so that the time for processing into fertilizer is short, which is energy-saving and efficient.

Large Scale Compost Turner for pig manure disposal

1. Organic fertilizer fermentation equipment for turning over and fermenting chicken manure

Mix the collected chicken manure with some hay or straw powder and add some starter to make compost and ferment. During the fermentation time, the chicken manure is turned over and fermented with a turning machine, and the organic fertilizer is fully fermented only by turning the pile evenly.

2. The grinder crushes chicken manure organic fertilizer

A wet material crusher can be used for the crushing process. The semi-wet material crusher uses high-speed rotating blades to destroy the fiber with good particle size, high efficiency and high energy. The semi-wet material crusher is mostly used in the production and processing of organic fertilizer, and has a good effect on destroying chicken manure, sodium humate and other materials.

3. Equipment for making organic fertilizer pellets from chicken manure

The chicken manure organic fertilizer is granulated with a disc granulator or a stranded granulator. Make the fertilizer granular, with some weight, not easily dissipated by the wind.

manure rotary dryer machine in organic fertilizer production line

Fourth, use drying and cooling equipment

If it is organic fertilizer particles, cooling equipment can be used for cooling. No drying equipment is needed. If it is powder equipment, it needs to be dried with a tumble dryer first, and then cooled with a cooler.

Rotary Screening Machine for screening unqualified pellets

Five, sieving machine sieving fertilizer

The particles produced in the granulating equipment will have different diameters and need to be sieved and classified by a sieving machine. The large and small granular materials that are unqualified in the screening are transported out by a belt elevator, destroyed from the beginning, and then sent to the granulator for re-granulation.

fertilizer granules coating machine

Sixth, coating equipment coating layer

The coating machine is composed of a screw conveyor, a mixing tank, an oil pump, and a main engine. Powder dusting or liquid coating technology can effectively prevent the agglomeration of compound fertilizers

Step 7: Automatic packaging scale weighing and sealing packaging

Organic fertilizer granular materials are packaged. Fertilizers are actively packaged and weighed to complete quantitative weighing and packaging.

These are the processing methods of chicken manure organic fertilizer equipment processing chicken manure organic fertilizer

As the process part of the granular organic fertilizer production equipment, the main technical means of the powdered organic fertilizer equipment are: fermentation, decomposition, crushing and mixing of organic raw materials, livestock and poultry manure or domestic garbage, sludge, distiller’s grains, biogas residue and other raw materials ,Package.

The basic process configuration of organic fertilizer equipment is dehydration, drying, fermentation, crushing, mixing, and packaging. This completes the processing of powdered organic fertilizer. Compared with the simple process of powdered fertilizers, granular organic fertilizers require further processing.

The basic process configuration of granular organic fertilizer equipment is dehydration, drying, fermentation, crushing, stirring, granulation, cooling, and packaging. Equipped with organic fertilizer granulator, organic fertilizer dryer, organic fertilizer coating machine. After the pellets are mechanically cooled, they can be packaged, stored or sold.

Organic Fertilizer Production Line Flow Chart

Process system equipment of organic fertilizer production process flow

1. Fermentation system: The fermentation system of the organic fertilizer equipment process is composed of a feed conveyor, a biological deodorizer, a stirring mixer, a special lifting dump truck and an electrical automatic control system.
2. Drying system: The main equipment includes belt conveyor, rotary dryer, cooler, induced draft fan, hot air stove, etc.
3. Deodorization and dust removal system: consists of a sedimentation chamber, a dust removal chamber, etc.
4. Crushing system: including a new type of semi-wet material crusher, LP chain crusher or cage crusher, etc.
5. The batching system is composed of an electronic batching system, a disc feeder, and a vibrating screen. It can be equipped with 6-8 kinds of raw materials at a time.
6. The mixing system consists of optional horizontal mixer or pan mixer, vibrating screen, mobile belt conveyor, etc.
7. Granulation equipment required for organic fertilizer granulation system. Optional granulation equipment includes: organic fertilizer compound fertilizer combined granulator, drum extrusion granulator, disc granulator, special granulator for organic fertilizer, rounding machine, etc.
8. Drying system: The organic fertilizer drying system consists of a drum dryer and a cooler.
9. Screening and coating system: It is mainly completed by a drum screening machine, which can be equipped with a one-stage screening machine and a two-stage screening machine, with high yield and good granularity; after the screening machine, coating can be used to prevent the fertility from being dispersed.
10. The finished product packaging system generally includes electronic quantitative packaging scales, silos, automatic sewing machines, etc., to realize the automatic non-intermittent production of organic fertilizer equipment, and the conveying system mostly uses belt conveyors and screw conveyors.

Self Propelled Windrow Compost Turner For Sale

• Manure compost turner machine: industrialized fermentation treatment of organic solids such as animal manure, domestic garbage, sludge, and crop straws. The equipment fully ferments the uniformity of fermented materials. So that the front of the fermentation tank can be freely put in or taken out of the fermentation method, and wastes such as feces can be retained for a long time.

high moisture materials cruhser effect

• The wet material crusher is a professional crushing equipment for crushing high humidity and multi-fiber materials. Using high-speed rotating blades, crushed fibers have good particle size, high efficiency and high energy. The semi-wet material crusher is mostly used in the production and processing of organic fertilizer, and it has a good effect on crushing raw materials such as chicken manure and sodium humate.

mixng machine

• The mixer has fast mixing speed and good uniformity. It can mix and add 30% viscous materials with liquid. There are two oppositely rotating paddles and rotors when it is working. Because the blade has multiple special angles, it can be mixed quickly and effectively regardless of the shape, size and density of the material. The bottom opening door is adopted for fast unloading speed and less residual quantity.

Pig Manure Granulation Machine

• The organic fertilizer granulator is a molding machine that can make materials into specific shapes. It is widely used in the production of organic fertilizer, bio-organic fertilizer and other fields. According to the structure and working principle, it can be divided into double roller extrusion granulator machine, disc-type granulator, and round shaping granulator machine, new organic fertilizer granulator, etc. For organic fertilizer made from cow dung, we recommend a new type stirring tooth granulator.

Chicken Manure Dryer

• Rotary dryer is mainly composed of rotating body, lifting plate, transmission device, supporting device and sealing ring. Diameter: φ1000-φ4000, length depends on drying requirements. One of the traditional drying equipment is a cylinder that is slightly inclined to the horizontal. The material is added from the higher end, and the high temperature and hot flue gas flows into the cylinder side by side with the material. As the cylinder rotates, the material is due to gravity. Run to the lower end. A copy board is installed on the inner wall of the cylinder to pick up and sprinkle materials. In the process of falling, the material is broken into fine particles by the dispersing device, which increases the contact surface between the material and the airflow, so as to increase the drying rate and promote the advancement of the material. The dried product is collected from the lower part of the bottom end.
• The rotary cooler can reduce the moisture content while cooling to a certain temperature, reduce labor intensity, and increase output. The drum type cooler is driven by the main motor to drive the belt and pulley, which are transmitted to the driving shaft through the reducer, and installed on the driving shaft. The split gears on the upper gear mesh with the large ring gear fixed on the body and work in opposite directions.

Customized Fertilizer Screening Machine in ShunXin

• The drum screening machine adopts a combined screen, which is convenient for maintenance and replacement. The machine has a simple structure, convenient operation and stable operation. The drum screening machine is mainly used to separate the finished product and the returned material, and can also realize the classification of the finished product, so that the finished product is evenly classified.

fertilizer granules coating machine

• The granular fertilizer coating machine is composed of screw conveyor, mixing tank, oil pump, main engine, etc., with powder dusting or liquid coating process, which can effectively prevent the agglomeration of compound fertilizer. The main machine adopts polypropylene lining or acid-resistant stainless steel.

fertilizer single bucket packing machine

• The fertilizer packaging machine is mainly composed of material import, feeding mechanism (gate), weighing hopper, bag clamping mechanism, frame, suction port, pneumatic system, sensor, control box, conveying and sewing mechanism, etc.
• Conveyor: Configure belt conveyor, bucket elevator or screw conveyor according to the actual needs of customers.

The organic fertilizer production line with an annual output of 5,000 tons is a small organic fertilizer production line, and its configuration includes: fermentation turning machine, grinder, granulator, dryer, and screening machine. If necessary, automatic packaging machines, etc. must be prepared. These equipments are generally indispensable. In fact, these equipments have different preparation parameters and different specifications, such as pelletizers, disc type pelletizers, and new types of pelletizers. The same is true for other equipment, of course, there are differences in prices, so everything depends on your specific situation. What you need, we can customize different equipment according to your needs. A small organic fertilizer production line has low investment cost and is easy to use. It can not only meet the needs of local fertilizers, but also meet the needs of surrounding markets.

Detailed description of the configuration of the production line with an annual output of 5,000 tons of organic fertilizer pellets:

1. Fermentation composting turner machines: directly put the materials into strips, and use a wheeled compostturning machine to ride on the pile for fermentation. Using tank fermentation, you need to build 1-5 fermentation tanks with a width of 3 meters and a length of 40-60 meters according to your production scale. The fermented product is continuously put into the fermentation tank, and the groove turning compost machine is used for fermentation, which can achieve the purpose of water regulation, uniform stirring, deodorization and dehumidification. In this way, a lot of labor can be saved, and the purpose of being fully decomposed can be achieved.
2. Crusher: The large debris and stones in the sieved organic fertilizer are separated and crushed, so that it is beautiful and can ensure the quality of the product.
3. Granulator: After crushing and mixing the material, it is granulated.
4. Drying machine: drying and cooling the manufactured particles.
5. Screening machine: sieving the fermented organic fertilizer to separate the bulk and debris fibers inside, which is convenient for the next step of crushing, granulating and packaging of semi-wet materials.
6. Packing machine: granulate organic fertilizer particles for direct packaging and sales.

The production process of the organic fertilizer production line refers to the process of processing waste resources containing organic matter into commercial organic fertilizers through corresponding equipment through harmless treatment. The detailed process has the following steps:

• Preparation of raw materials before fermentation: all raw materials used for fermentation are processed to a particle size below 1-60mm through crushing equipment, which is convenient for improving the contact surface of the materials during fermentation.
• Fermentation of raw materials: the ratio of raw materials, adjust the water content and the ratio of various raw materials, the adjustment of the raw material ratio should meet the normal range of carbon to nitrogen ratio of about 30:1, and the addition of other auxiliary materials should be combined with local market demand or soil testing The result of adjustment is that the fermented organic fertilizer product has better adaptability.

crawler type compost turning machine

• Raw material crushing: The fermented raw materials have been fully decomposed, and can be finely crushed using a semi-moisturematerial shredder. The crushed particle size is suitable for the requirements of raw material granulation.
• Raw material mixing: The raw materials after fermentation are combined with market demand. If you need to add other auxiliary materials, you need to use a mixer for full mixing, or some raw materials need to add auxiliary granulation materials to improve the success rate of raw materials granulation.

rotary screeing machine for making organic fertilizer

• Drying and cooling: The granulated material still contains about 30% moisture. Use a dryer to dry its moisture below 15%, and then use a cooler to quickly cool down and shape, improve the strength of the pellet, and facilitate transportation and storage.
• Particle screening: The cooled particles are classified by a drum screening machine. The oversized or undersized particles are crushed and re-granulated, and the qualified products are screened out and flowed into the next process.
• Finished product coating: Coating qualified products to increase the brightness and roundness of the particles.

rotary drum coating machine

• Finished product packaging: The film-wrapped particles are the finished products according to the output and labor conditions using automatic packaging machines or manually packed into bags and transported to the finished product warehouse.

The powdery small-scale organic fertilizer production line contains five types of equipment, fermentation equipment-crushing equipment-mixing equipment-screening equipment-packaging equipment. These types of equipment have already met the production of powdered small-scale organic fertilizer production lines.

• Fermentation turner machine mainly uses livestock and poultry manure: chicken manure, pig manure, cow manure, duck manure, sheep manure, rice bran, wood chips, straw, various straws, peanut shells, mushroom bag and other animal and plant residues, etc. One or more of them are mixed for fermentation, ripening, and decomposition.

• Organic fertilizer crushing machines.This machine has the same crushing effect on fermented organic fertilizer, sludge, biogas residue, coal gangue and other slag. The high-humidity material shredder makes the whole machine reasonable in structure, easy to install, high in efficiency, significant in energy saving, durable and simple in maintenance.Just wait. This machine is equivalent to two hammers broken and combined into one, which is reasonably combined into a whole. Two sets of rotors are used in series. It has the following characteristics: Double rotors. Two sets of rotors connected in series are crushed by the upper and lower stages. The crushed materials are immediately crushed by the hammer head of the lower-level rotor that rotates rapidly, and the materials in the inner cavity quickly collide with each other and crush each other to achieve the effect of hammer powder and material powder, and they are directly discharged.

• Mixing machine.This machine has high mixing degree and low residual amount, and it is suitable for mixing compound feed, concentrated feed and additive pre-mixed feed. The specific features are: the materials are fully mixed, thereby improving the uniformity of mixing. The use of a novel rotor structure enables the minimum gap between the rotor and the casing to be adjusted to close to zero, which effectively reduces the residual amount of materials.

The special features of this machine : the rotor design can also crush larger materials, the overall structure is more reasonable, the appearance is beautiful, and the operation and      maintenance  are convenient. In order to make the machine work normally, please read the instruction manual carefully to avoid damage to the machine.

• Screening equipment. The drum screening machine is a commonly used equipment in the production of compound fertilizer. It is mainly used to separate the finished product and the returned material. It can also realize the classification of the product and make the finished product evenly classified. The machine adopts a combined screen, which is convenient maintenance and replacement, with simple structure, convenient operation and stable operation, is an ideal equipment in the production of compound fertilizer.

• Packing equipment: It is a new generation of intelligent packaging scale developed by our company. The packaging scale is mainly composed of four parts: automatic weighing device, conveying device, sewing device and computer control. It has the characteristics of reasonable structure, beautiful appearance, stable operation, energy saving and electricity saving, convenient operation and accurate weighing. Computer quantitative packaging scale: The host adopts fast, medium and slow three-speed feeding and special feeding auger structure, advanced digital frequency conversion technology, sampling processing technology, anti-interference technology, and realizes automatic error compensation and correction.

The above are the organic fertilizer production equipment and parameters required by the FPC powdery small-scale organic fertilizer production line. The approximate investment price is 35,000-90,000 US dollars. It is for reference only and can be inquired in detail.