My Blog

The granulator granulates better quality particles, users can external vacuum cleaner, meet the requirements of environmental protection.
This new two in one organic fertilizer granulator is used in the 200 t / D organic fertilizer combination granulation production line with a production capacity of 1-20 T / h.

Pan Granulation Compound Fertilizer Production Line

It is a two in one granulator for organic fertilizer and compound fertilizer, so it is also used in the 200 t / D compound fertilizer combination granulation production line.

Its working powder is 42.6 to 80 kW, easy to clean the inner wall of the shell. Working principle: the material first enters the first granulation section from the uniform feeding section, and then is prepared for granulation through the high-speed adjustable mixing knife, and then pushed to the second granulation section.

Granulation material in the secondary granulation section, through the internal mixed teeth secondary granulation and outer cylinder forming, to achieve the purpose of granulation, so that the particles have better quality assurance.

We have designed the suction and discharge ports in the silo, users can connect the vacuum cleaner to meet the environmental emission requirements. We also designed the nozzles for observation doors and spray pipes. Users can spray liquid into the particles in the roller according to the particle size requirements.

More details, welcome go to https://fertilizergranulatormanufacturer.com/

In the complete set of equipment required for biological fertilizer production, fermentation stacker has gradually become a convenient tool to replace labor and forklift to deliver materials, and is the mainstream product of composting development trend with important influence.

According to the characteristics of organic fertilizer dumper, the characteristics used in composting production are: when making fertilizer, the dumper needs to adjust the carbon nitrogen ratio, pH and water content of raw materials, and some auxiliary materials must be added. add to. Depending on the lathe, the main raw materials and various auxiliary materials which are roughly stacked together in proportion can be evenly mixed to achieve the ideal granulating effect suitable for the granulator.

In the traditional stacker operation, the raw material particles are fully contacted and mixed with the air, and a large amount of fresh air can be cultivated in the stacker, which helps the aerobic microorganisms to produce spontaneous combustion fermentation heat and increase the stacking temperature.

When the temperature is high, adding fresh air to the reactor can reduce the temperature of the chimney. It forms the shape of high temperature exchange, and all kinds of beneficial microorganisms develop and reproduce in the appropriate temperature range.

The stacker system can process the material into small lumps, make the dense material pile loose and elastic, and form the appropriate porosity to promote the entry of oxygen.
After proper moisture fermentation, the moisture content of organic fertilizer is less than 40%. In the fermentation process, the biochemical reaction will produce new water, and the consumption of raw materials by microorganisms will gradually release water as carrier.

Therefore, in the process of fertilizer production, the water content is reduced in time. In addition to the evaporation caused by heat conduction, the raw materials are shifted from the stacker to form a forced water vapor distribution.

Our new organic fertilizer manufacturing equipment includes transverse device, walking device and stacking steering device. The stacking turning device consists of two reducers fixed on the frame, which are connected to the corresponding reducers through couplings and fixed with spiral blades. The utility model has the characteristics of improving the fermentation rate, rapidly decomposing the compost, preventing the generation of peculiar smell, and shortening the fermentation time.

eIt is usually applied to: farm, fertilizer fermentation, fertilizer factory, brewery, food factory and sugar factory fermentation of raw materials in fermentation waste fermentation and sugar residue crushing.

Bio organic fertilizer production line is designed for the production of bio organic fertilizer. In the fertilizer manufacturing process of bio compost, different types and series of fertilizer equipment should be equipped to complete the production process. But why do we produce bio organic fertilizer?

Introduce biological fertilizer production line. In the production process of bio organic fertilizer, it will be equipped with chain crusher, horizontal mixer, flat mold granulator, drum screen machine and a series of fertilizer equipment.

Function of biological fertilizer:

1. Improve soil fertility. This is the main function of biological fertilizer. For example, all kinds of self generated, combined or symbiotic nitrogen fixation biological fertilizers can fix nitrogen in the air and increase the nitrogen content in the soil; A variety of microorganisms can decompose minerals such as phosphorus and potassium.

For example, silicate bacteria can decompose feldspar, potassium, mica and phosphate rock in soil, thus making insoluble phosphorus and potassium effective.

Assembly line, will be equipped with different types of machines to complete the production process.

2. Make and assist crops to absorb nutrients. Some bacterial fertilizers can not only increase the effective nutrients of soil, but also produce a variety of hormones and vitamins, thus promoting the growth of crops.

3. Enhance plant resistance. After inoculated with some biological fertilizers, they become the main bacteria in the rhizosphere of crops because of their massive reproduction in the roots. They can secrete antibiotics against fungi and bacteria, such as inhibiting the growth of hyperactive bacteria.

Bio fertilizer production

The use of fertilization equipment not only improves the work efficiency, but also saves more labor costs. In addition to the design of bio organic fertilizer production line, we also need to design organic fertilizer production line to produce organic fertilizer. More others design and use a series of fertilizer production process types to complete the production process.

Go to https://compostturnermachine.com/bio-composter-machine/ 

Bio organic compost production line is a kind of compost which has the function of both microbial compost and organic compost. It is composed of specific functional microorganisms and organic matter, mainly used to remove plant residues (such as livestock manure, crop straw, etc.) After harmless treatment and decomposition.

The production method and operation process of bio organic compost are as follows:

1. The first step in the production process of bio organic compost: the total dosage of selected strains is 0.2% – 0.5%.
2. Production process of bio organic compost: preparation and requirements of raw and auxiliary materials:
3. Main ingredients: fruit residue, dry bagasse, edible fungus residue, distiller’s grains, sugar residue, vinegar residue, starch residue, cassava residue, citric acid residue, soy sauce residue, monosodium glutamate residue, powder residue, bean curd residue, drug residue, oil residue, oil cake, bran, cottonseed meal, moldy feed, sludge, brewery’s residue, slaughterhouse residue, Ho water (s water), Leftover food, human and animal manure and other materials.

How to turn theses machines into bio composts, go to https://compostturnermachine.com/bio-composter-machine/

1. Auxiliary materials: all kinds of crop straws, leaves and weeds, melons and vines, straw, pine hull, peanut hull, sawdust, rice husk powder, rice bran, etc. can be dried, crushed and made into high carbon.
2. The proportion of main materials and auxiliary materials is 5:1-3:1.
3. The production process of bio organic compost production line is divided into three steps: the water content should be controlled at 60-65%, and the water can only come out by hand holding materials in groups. Bacteria, main materials and auxiliary materials should be mixed evenly. The ambient temperature should be higher than 15 ℃. The stacking area of materials shall not be less than 4 square meters, the width shall be 1.5-2 meters, the height shall be 0.6 meters, and the length shall not be limited.
4. The production process of bio organic compost is divided into four steps: composting should be turned at 50 ℃ once a day. If the chimney temperature exceeds 65 ℃, it will be overturned again. The temperature will be controlled below 70 ℃. The temperature of composting will be lower, the material will be loose, the material will not have the original smell, and there will be a little ammonia smell. White hyphae are produced in the pile and decompose.

The construction scale of equipment configuration of organic composting production line is generally 100000 to 100000 tons per year. Local resources, market capacity and market coverage should be considered comprehensively. The cost of organic composting plants ranges from tens of thousands to hundreds of thousands.

The manufacturer of organic composting equipment will design the production line scheme according to the actual situation of customers, such as investigating the characteristics of raw materials, local soil conditions, planting structure, factory site conditions, automation requirements, etc.

New Type Organic Fertilizer Production Line

The low configuration organic composting production line only needs fermentation equipment, pulverizer, mixer, granulator, screening machine and packaging machine. This is a basic configuration, according to the actual needs and requirements of customers to add equipment. Complete sets of equipment: fermentation equipment, grinder, mixer, granulator, dryer, cooler, screening machine, coating machine, packaging machine, belt conveyor and other equipment.

Technological process of organic composting of chicken manure

• The first is fermentation and decomposition of raw materials such as livestock manure. The whole fermentation process will destroy the number of harmful bacteria inside. Killing bacteria is also a crucial step in the whole organic composting production line.
• Secondly, organic compost crushing equipment and semi wet material crusher are used to decompose raw materials.

organic fertilizer large fermentation pot

•  Matching raw materials is one of the most important processes in organic compost production. The main purpose is to add appropriate auxiliary materials according to a certain proportion to improve the composting quality.
• The preparation is evenly mixed and stirred, and then sent to the composting granulator for granulation, which is also an important aspect of the whole organic composting process.

Vertical Fertilizer Material Crushing Machines

•  After the raw material is dried to obtain high temperature energy, the next step needs low temperature cooling. Since water cannot be used for cooling, a cooler is needed to separate the contact between material and water.
• Screening is to screen unqualified granular compost. The screening device here has the advantage of simple operation.
• Apply qualified products to increase the brightness and roundness of particles.
•  Finished product packaging: package the coated particles, i.e. the finished product, in a ventilated place.

1. The bearings in the equipment carry all the loads of the machine, so excellent lubrication has a great influence on the bearing life.
2. Lubricating oil has a direct impact on the service life and operation rate of organic fertilizer production equipment. Therefore, it is necessary to clean the lubricating oil required to be written, and the sealing is necessary to be outstanding. The primary oil filling place of this machine is rolling bearing, roll bearing, all gear movable bearing and sliding plane.
3. The tyre of new equipment is easy to loose, so it is necessary to check frequently.
4. Always pay attention to whether the operation of all parts of the machine is normal.
5. Pay attention to check the wear degree of easily worn parts and replace worn parts at any time.
6. Dust and other debris should be removed from the underframe plane of the movable equipment of organic fertilizer production equipment, so as to avoid that the movable bearing can not move on the underframe when the machine encounters materials that cannot be broken, resulting in serious accidents.

7. Pay attention to lubrication and maintenance of organic fertilizer equipment in production. Organic fertilizer itself is formed by the residual limbs of animals and plants or their metabolites, that is, the metabolites of manure and urine. It is also rich in nitrogen, phosphorus and potassium elements, which can provide good nutrients for the makers, and most of these elements can be well absorbed to help the crops grow better. Now organic fertilizer has the characteristics of pollution-free, do not worry about polluting the land, better realize the sustainable production of agriculture. Therefore, we should pay attention to the maintenance of organic fertilizer equipment in the process of using organic fertilizer equipment to ensure the maintenance of all lubrication links of organic fertilizer equipment.
8. Therefore, the fermentation link of the organic fertilizer equipment is also very important, so we should pay attention to the maintenance of each link of the organic fertilizer equipment, the regular inspection of each part and the regular replacement of the bearing, so as to ensure the long-term use and stability of the organic fertilizer equipment.

Fertilizer Making Fertilizer Supplier: https://fertilizergranulatormanufacturer.com/

Through harmless treatment and resource utilization of feces, the green development of animal husbandry was implemented to realize the circulation of agriculture and animal husbandry and zero emission, and the pollution problem of livestock and poultry breeding was solved. Organic fertilizer comes from nature, and its nutrient release is uniform. It can obviously improve crop quality. It is an ideal fertilizer for producing high-quality agricultural products and engaging in ecological agriculture.

Some characteristics of chicken manure:

Chicken manure is rich in nutrients, especially nitrogen, because it contains urine.
They are more acidic than most fertilizer sources and are therefore particularly suitable for acid loving plants.
They are also often very hot and burn plants if applied fresh.
Cooling the composting chicken dungs and reducing the risk of pathogens is strongly recommended.
Chicken manure releases most of its nutrients into the soil in the first year of application.
By making chicken manure into granules, we can bring more nutrients with less load over a longer distance, thus providing value to farmers.
In addition to concentrated nutrients, chicken manure particles are easy to handle and store, making them a viable breeding option for almost any scale operation.

Chicken manure treatment method:

1. The chicken manure was directly dried by a chicken manure drying machine;
2. In traditional fermentation, it usually takes 1-3 months to reach the maturity of traditional fermentation (open-air). The odor around it is bad, and there are a large number of mosquitoes and flies. With the development of rapid fermentation with fermentation agent at home and abroad, it shows that adding specific microbial flora to chicken manure can effectively promote the degradation of organic matter, accelerate the decomposition rate of chicken manure, and help to eliminate the odor causing harmful bacteria substances and reduce the environmental pollution. The main fermentation bacteria and organic fertilizer fermentation and throwing equipment and organic fertilizer equipment play a key role in the fermentation of chicken manure, including chicken manure organic fertilizer fermentation equipment, organic fertilizer grinder, organic fertilizer mixing equipment, organic fertilizer granulating equipment, organic fertilizer dryer, organic fertilizer cooler, organic fertilizer drum screening machine, organic fertilizer coating machine, organic fertilizer packaging machine, etc