My Blog

My WordPress Blog

Top 6 ways to extend your organic machine service tips

Top 6 ways to extend your organic machine service tips

Organic fertilizer production equipment should be kept in daily use to extend its service life. Let’s take a look at the skills of maintaining the organic fertilizer production equipment:

1. Keep the work site clean. After each experiment on the organic fertilizer manufacturing equipment, the particle leaves and residual mortar inside and outside the granulating pot should be cleaned, and the mortar and flying objects falling on or scattered on the organic fertilizer equipment should be cleaned. Wipe the exposed processing surface clean, apply anti rust meat paint, and cover the corresponding protective cover to prevent the second invasion of dust.

Pan Granulation Compound Fertilizer Production Line

Pan Granulation Compound Fertilizer Production Line

2. There is no external oil filling hole for the organic fertilizer equipment needed for the production of biological fertilizer, and the gears and worm gears are lubricated with special grease for the organic fertilizer equipment. Top and bottom should be triple buttered every season. When refueling, the dynamic transmission cover and the transmission cover can be opened respectively.

The lubricating oil should drip into the sliding surface of the supporting gearbox and the hinge joint of the bracket frequently. The worm gear box and bearing are filled with enough transmission grease at the factory, but the machine of the gear box should be cleaned and all protective lubricants should be replaced after using once a year.

3. Always pay attention to the operation of organic fertilizer machine. There should be no serious abnormal sound or metal friction sound. If any abnormality is found, please stop using immediately and check. Use it after troubleshooting. No corresponding check was found. Cause the machine cannot be started.

If there is metal friction sound, please first check the clearance between the granulator and the granulator blade of the organic fertilizer equipment.

4. Regularly check the standard clearance between granulating pans.

5. When replacing the pelletizing pot or blade of organic fertilizer barrel, the working clearance should be re measured and adjusted for many times. It can only be used after meeting the standard.

6. If it is impossible to operate the organic fertilizer machine by pressing the program controller, please check whether the power supply voltage, power plug and socket, connecting plug and socket are normal, and check the internal fault of the controller.

The above is the maintenance work of the organic fertilizer equipment we introduced. Only by doing this, can the service life of the equipment be extended, and the equipment be used more smoothly. More detailed info go to https://organicfertilizerplants.com/

Leave a Reply

Your email address will not be published. Required fields are marked *


*