My Blog

• Before using the shredder, check the appearance of the machine for damage caused by transportation, and whether the random information is complete. Before turning on the power to the grinder, please confirm whether there are any iron foreign objects in the machine cavity to prevent the knife from being hit, and manually rotate the flywheel more than one circle. It is forbidden to carry movable knives by hand to ensure safety. Make sure that the main machine of the shredder rotates correctly, and then the motor can be started and put into production. Note: The main machine of the shredder must not be reversed when turning, otherwise it will cause serious equipment accidents such as damage to the fixed and fixed knives and damage to the left and right labyrinths.
• According to the characteristics of the material, the normal use time of the shredder cutter has its length. If it is worn, please sharpen the knife in time. When installing the knife, the rotating knife must be tightened. Cut the screws, make sure that the gap between the rotary knife and the fixed knife is 0.2-0.3, then tighten the fixed knife screw and lock the adjustment screw to complete the tool installation. The pulverizer has been running for about 500 hours. Please check the left and right main bearings, clean them if necessary, and add proper amount of grease or replace all the grease.
• The organic fertilizer production line crusher equipment can reach 25-55% of the moisture allowable value of the bio-fermented organic fertilizer material, and the crushing particle size can reach the requirement of 50 mesh granulation. This machine solves the problem of crushing high-water organic materials, and has a good crushing effect on organic materials that have undergone fermentation treatment. The bio-organic fertilizer production line adopts no-drying room temperature process to produce, one-time molding, and the output is 1-1.5t/h and 1.5-3th/h. The equipment has low investment, quick results and good economic benefits. The process layout of the complete set of equipment is compact, scientific and reasonable, and advanced in technology. Energy saving and consumption reduction, no three wastes are discharged, stable operation, reliable operation and convenient maintenance.

There are many kinds of fertilizer crushing machine in FPC fertilizer equipment production base. Click here to get efficient fertilizer shredder. https://www.fertilizerplantcost.com/compost-shredder-for-sale/

Semi wet material crusher is a new type of high efficiency single rotor reversible crusher. It uses a high-speed rotating blade to crush fibers with good particle size and strong adaptability to material water content. It is especially suitable for making fermented waste powder or other materials with high water content. It has high efficiency, high energy efficiency and crushing effect.

The particle size can reach 20-50 mesh, which can meet the granulation requirements of general fertilizer granulator. The rotor structure of the equipment is novel, the design is reasonable, the operation is simple and the operation is stable. Completely solve the problem of organic matter crushing with high humidity (water content 25% – 50%), which is an environmentally applicable biotechnology promotion project.

Semi wet material crusher is widely used to crush glass, livestock manure, sludge, domestic waste, straw and other raw materials in the manufacturing process of urban domestic waste and organic fertilizer, and hard materials such as ceramics, bricks and gravel. Crush to achieve the effect of safe use.

The semi wet material crusher adopts two groups of rotors in series, so that the materials crushed by the upper rotor are immediately crushed again by the hammer head of the rapidly rotating lower rotor, so that the materials crushed by the upper rotor are immediately crushed. The materials in the inner cavity collide at high speed and smash each other to achieve hammer powder. The powder effect is discharged directly.

The characteristics of semi wet material crusher are mainly reflected in the following aspects:

1. The discharge particle size can be adjusted arbitrarily and is not affected by the wear of vulnerable parts.
2. With large output and low energy consumption, the power consumption can be saved by more than 40% under the same output. It is equivalent to combining two Hammer Crushers into one. The reasonable design combination is wet material crusher, and two sets of rotors are used in series.
3. The semi wet material crusher does not jam, has good concession, high safety factor, will not jam safely, will not affect production in rainy days, and will automatically clean the mud;

4. The hammer head has a long service life. The hammer head used on eight sides can greatly improve the utilization rate, reduce the use cost and reduce the maintenance time.
Semi wet material crusher is an ideal machine for biological fertilizer production and processing units to shorten the production process of organic fertilizer and compost, reduce equipment investment and save operation cost. As an advanced fertilizer mechanism manufacturer in China, we produce different types of fertilizer machines. Welcome to visit and buy.

More details, go to https://fertilizerplantequiment.com/product/semi-wet-material-crusher/