My Blog

In recent years, in order to further protect the ecological environment and reduce air pollution, the use of chicken dung, cow dung, pig dung and other poultry and livestock manure has been promoted to replace chemical fertilizers in organic fertilizers. The establishment of a fertilizer processing plant with organic fertilizer equipment has been rewarded with great returns. So, how much does it cost to run a large-scale organic fertilizer production line with an annual output of 50,000 to 100,000 tons?

A complete set of large-scale livestock separation organic fertilizer production lines with an annual output of 50,000-100,000 tons include: forklift feeder, composting turner, vertical crusher, drum screening machine, dynamic batching machine, granulator, rounding machine, dryer, cooler, coating machine, automatic quantitative packaging scale.

First, use a solid-liquid separator to control the moisture content of the animal manure below 85%, then add straw, rice bran, corn flour and other auxiliary materials. After fully mixing with a mixer, shovel it into the fermentation groove with a forklift, and use organic fertilizer to turn it. The materials pile is fully fermented and decomposed; using the conveyor belt between the equipment, it is transported to the grinder for pulverization, and then sent to the organic fertilizer granulator for granulation. The produced particles have high water content and are dried by the dryer before entering the cooler cools the pellets and improves the strength of the pellets. Then it is sent to the drum sieving machine to screen out the unqualified particles, and then carry out the secondary granulation. After the qualified, the packaging machine is used for packaging and the finished product is produced.

The complete process of making bio-organic fertilizer:

• Ground strip pile, use ground turning machine, or put materials in fermentation tank, use trough type turning and throwing machine.
• Evenly sprinkle the organic fertilizer starter, turn the pile and ferment to reach the temperature, smell, decompose, and pick up the weeds and grass seeds.
• Fermentation for 7-12 days, depending on the temperature in different places, how many times is it?No the same.
• Completely fermented and decomposed, out of the pool (the ground type is directly piled up with a forklift).
• Use a grading sieve for coarse and fine screening (the powdered fertilizer that has been screened can be sold directly).
• After crushing the sieved large pieces with afertilizer pulverizer, return to the grading sieve.
• Mix the raw materials, add the quantity of each raw material in strict accordance with the requirements of the technicians, and add various raw materials in the electronic belt scale or batching machine.
• The crushed raw materials enter the aggregate belt conveyor, and then granulate with a granulator.
• It is sent to the animal separation organic fertilizer dryer, which adopts the method of cylindrical edge transfer, flange connection and direct heat transfer, which is suitable for drying the compound fertilizer after granulation.
• Enter the cooler for cooling. The rotary cooler is mainly used to cool the dried compound fertilizer products, and can directly cool the hot granular fertilizer to close to normal temperature.
• Screening is performed again, and the separated large particles are crushed by the large particle crusher, and enter the return belt together with the separated fine powder, and then return to the granulator for granulation.
• The finished product is lifted to the material box on the packaging machinethrough the belt conveyor, and discharged into the scale body according to the set weight for automatic weighing operation, and finally the finished product is packaged and sold.

Each type of production line has its own characteristics. What kind of organic fertilizer is suitable for making what kind of organic fertilizer equipment is needed. For example, the disc and rotating gear production line must be equipped with a drying and cooling machine, and use hot air to dry the organic fertilizer, and then use a cold air exhaust system to cool the organic fertilizer, so that the hardness of the particles will be better. Users can customize the appropriate configuration according to their needs. The organic fertilizer production line has different equipment configurations according to different raw materials. You can also make a suitable plan according to the investment budget. The price of the organic fertilizer production line with different yields is also different. The investment in running a large-scale organic fertilizer production line is not small, but the return on profits is also considerable, and the results of the operation are good, and the cost can be recovered within two years.

Here is the best solution of machine selection for $110,000 organic fertilizer production line. Welcome to our website to get detailed information. https://www.fertilizerplantcost.com/110000-usd-organic-manure-making-machine-price/

Overview of powdery organic fertilizer equipment

Powder organic fertilizer equipment is one of the traditional organic fertilizer production equipment. Powder organic fertilizer is relatively easy to produce. The main production process is to produce semi-finished products through traditional fermentation of livestock and poultry manure, and then crush it to reach 30-40 mesh, and the moisture content reaches 30%, organic matter reaches 30%, and total nutrients reach 5% or more. If the total nutrients are not up to the standard after fermentation, some chemical fertilizers of nitrogen, phosphorus and potassium can be added appropriately. Therefore, the equipment for producing powder organic fertilizer is relatively simple.

What are the main powdered organic fertilizer equipment？

According to the production steps of powder organic fertilizer, the main equipment is mixer, composter, and crushing equipment, but such a simple design is relatively simple and requires more labor. If you want to have a high degree of mechanization, the detailed part of the subdivision is more re-examined, that is, after the first fermentation and the second fermentation, the organic raw materials are directly loaded into the multi-functional silo with a forklift, and the multi-functional silo is broken by mixing and then loaded. Screener, the under-screen material of the screener reaches 30-40 meshes and then is directly transported to the powdery organic fertilizer packaging machine for packaging finished products. The relatively large materials in the screener are crushed by the semi-wet material crusher and returned to the silo.

Production technology of powder organic fertilizer

The production technology of powder organic fertilizer mainly masters these key points. One is to combine several high-nitrogen organic raw materials and several high-carbon organic raw materials according to the formula standard of organic fertilizer fermentation, that is, carbon to nitrogen ratio, carbon to phosphorus ratio, and carbon to nitrogen ratio. Potassium ratio, PH value, moisture, and strains are mixed in proportion. The mixed forecast is directly pushed into the fermentation tank with a forklift for 10-12 days of aerobic fermentation. This process is a high-temperature fermentation process. After the fermentation process is completed, the aging process is carried out, that is, the second fermentation, the second fermentation. It takes 10-12 days. This process belongs to low-temperature fermentation. After the second fermentation is completed, the purpose of maturation is basically achieved. The purpose of these two processes is to decompose the macromolecular materials of organic raw materials into small molecular materials that can be absorbed and utilized by crops, which can also be said to be the process of transforming the organic state into an effective state. The fermented organic raw materials are tasteless, have a refreshing color and lower viscosity. After these two processes are completed, the following crushing-screening-packaging is completed, and the entire powder organic fertilizer production is completed.

FPC has been engaged in fertilizer production line design and installation over 15 years. Welcome to our official website to get customized fertilizer production line.

In recent years, the global NPK compound fertilizer market has seen tremendous growth, because people are increasingly aware of the urgency and necessity of balanced fertilization, and the development of NPK compound fertilizer production technology and formula has also played a certain role. In addition, NPK compound fertilizers usually have more premium space than single fertilizers. Therefore, many manufacturers put NPK compound fertilizers with more premium space than single fertilizers. Therefore, many manufacturers have included NPK compound fertilizers in their product portfolios.

The common granulation technology of compound fertilizer includes drum granulation, disc granulation, spray granulation, tower granulation and so on.

The high-tower nitrate rotating granulation method produces high-concentration nitro compound fertilizer. This technology sprays nicotine, phosphorus and potassium melts from the top of the tower, cools and agglomerates into granules during the landing process. In ammonium nitrate production enterprises, the use of high tower melting granulation method to produce compound fertilizer has the following advantages:

First, it can directly use concentrated ammonium nitrate solution and crushed solid ammonium nitrate for crushing to produce compound fertilizer. This operation simplifies the production process and ensures production safety.

Secondly, the melt rotating granulation process makes full use of the heat energy of the ammonium nitrate concentrate, the moisture content of the material is very low, and the drying process is not required, which greatly saves engineering consumption.

Drum granulator is the most widely used compound fertilizer processing equipment in compound fertilizer production. The formula limit is relatively small, and partial ammoniation can also be used. For most types of equipment, the production line can use 2-3 million units, the daily output is more than 280-400 tons, and the formula is more than 500 tons. Due to the small formula limit, high output, low investment, short construction period and other advantages, drum granulation technology is favored by many compound fertilizer manufacturers. And it is adopted by more and more compound fertilizer manufacturers. Using this method, we can use a drum granulator to complete the production process.

FPC independently develops and produces a complete set of fertilizer equipment such as fermentation equipment, drying equipment, granulation equipment, screening system, and batching system suitable for the production of organic fertilizer and bio-organic fertilizer. Welcome to visit our official website. https://www.fertilizerplantcost.com/npk-fertilizer-plant-cost/

In the organic fertilizer production industry, there are many types of equipment that can make organic fertilizer, and there are different supporting equipment according to different materials. We use poultry manure as raw material to analyze the two different organic fertilizer production of drum granulator and disc granulator.

The advantages and disadvantages of each granulator.

Disc granulation process characteristics:

The operation is intuitive, and the operation of the equipment can be grasped at any time. If an abnormality is found, the size of the particles can be adjusted in time. It is determined by the inclination and rotation speed of the disc, and the inclination and rotation speed of the disc can be adjusted. The control range of the particle size is wide, the adaptability is strong, and the ball formation rate is very high, which can reach 70% to 90%. The livestock manure organic fertilizer disc granulation process has short production process, simple structure, low investment and easy operation, which is more suitable for small and medium-sized enterprises.

Characteristics of drum granulation process:

Steam is introduced into the material layer in the drum to increase the temperature of the granulated material, dissolve the salt of the granulated material, and achieve a high liquid phase volume under low moisture content to meet the liquid phase volume required for material granulation. At the same time, the amount of evaporated water in the drying process is reduced. The inner wall of the drum is lined with a number of soft rubber plates or polypropylene plates, and there are vent holes at the corresponding positions on the cylinder. When the inner lining turns from the bottom to the upper with the cylinder at the same time, the inner lining sags due to its own weight, thereby causing adhesion The material on the inner lining falls due to gravity to achieve the function of automatically cleaning the conglomerate. During the operation, the operator can observe the ball formation of the material at any time, and take corresponding measures in time as needed to ensure the normal operation of the system.

There are quality pan granulator and rotary drum granulator in FPC. Welcome to our website to buy granulation machines.

The organic fertilizer powder production line has the advantages of simple equipment and technology, convenient operation of the production line, low investment cost, convenient maintenance and so on. As the preliminary process of the granular organic fertilizer production line, the powdery organic fertilizer production line is simply crushing, fermenting, and packaging. The chicken manure organic fertilizer powder production line requires two steps to process commercial organic fertilizer: pre-fermentation and powder processing. After the chicken manure has been fermented and decomposed, organic waste with a moisture content of about 30%-35% is crushed and screened. The finished product is conveyed to the finished product silo by a belt, and is measured and packed into the warehouse by a computerized quantitative packaging system.

What is the powder organic fertilizer production process?

The technological process of organic fertilizer powder production line can be simply divided into three processes: pre-treatment, one-time fermentation, and post-treatment.

Pre-treatment: After the compost raw materials are transported to the storage yard, they are weighed on a scale and sent to the mixing and mixing device, mixed with the factory-manufactured and domestic organic wastewater, added with compound bacteria, and roughly adjusted the moisture and carbon-nitrogen ratio of the compost according to the composition of the raw materials , After mixing, enter the next process.

One-time fermentation: The mixed raw materials are fed into the primary fermentation tank with a loader, and piled into a fermentation pile. A fan is used to forcefully vent air from the bottom of the fermentation tank to supply oxygen. At the same time, the pile is turned over for 2 days, and water is added ( Mainly based on in-plant manufacturing and domestic organic wastewater) and nutrition. Master the fermentation temperature between 50°C and 65°C, and hold aerobic fermentation. The fermentation cycle of this project is 8 days. Every day, one pool of raw materials and one pool of semi-finished products are fed. After the good semi-finished product is discharged, it is ready to enter the next process.

The organic fertilizer fermentation equipment used in this set of organic fertilizer production line is aerobic fermentation bacteria, which has the characteristics of fast heating, good deodorization effect, and maturity. It is suitable for static fermentation and dynamic fermentation mode, and can effectively treat livestock and poultry manure and waste solids. Organic matter such as crop stalks, rice straw, pine husks, peanut shells, rice bran, sawn wood, leaves, mushroom scraps, medicine residue, sugar mash, distiller’s grains, bagasse, monosodium glutamate residue, furfural residue, protein and crude fiber in municipal solid waste Perform rapid heating, deodorization, sterilization, decomposition, and constant temperature control for about 15 days, which can kill viruses, germs, eggs, and weed seeds, and achieve harmless treatment to effectively control the occurrence of soil diseases and insect pests and reduce the amount of pesticides.

There are customized organic fertilizer production lines in FPC. Click here to get the best solution.

The construction scale of general organic fertilizer production line configuration is generally 5000 tons-100,000 tons per year. It is necessary to comprehensively consider local resources, market capacity, and market coverage.

What is the cost of fertilizer production equipment?

The equipment investment scale and product selection plan of the manure organic fertilizer production line need to be formulated according to the following conditions: raw material resource characteristics, local soil conditions, local planting structure and main crop varieties, and comprehensive consideration of local resources, market capacity, and market coverage radius. Generally, small new factories can produce 10,000 tons (1.5-2.5 tons/hour), 20,000 tons (2.5-3.5 tons/hour), and 30,000 tons (4.5-6 tons/hour) per year. Medium-sized factories are producing 3- 50,000 tons, large factories are producing 50,000-100,000 tons per year. The investment scale and the design of the production line plan need to be formulated according to the characteristics of raw material resources, local soil conditions, local planting structure and main crop varieties, factory site conditions, and the degree of automation of production.

What configurations of the organic fertilizer production line can I buy?

The manure organic fertilizer production line has three configurations: high, medium and low. Large fertilizer plants must adopt a complete set of production configurations, and the appearance and nutrient content of the finished products can meet the market requirements, and they have a greater advantage in the promotion of finished organic fertilizers. The low-to-medium configuration organic fertilizer production line is suitable for small and medium-sized fertilizer factories. The sales scope of finished organic fertilizer is limited to nearby areas. Some processes in the organic fertilizer production process need to be completed manually.

How do I select the fertilizer machines according to the amount of raw materials?

If the daily production of animal manure exceeds 5 cubic meters, and the maximum amount does not exceed 10 cubic meters, you can purchase simple facilities, mainly mobile turning  machines (turning machines), shredders and other facilities, and the cost of investment facilities needs 15,000 to 45,000 USB. Yuan. If the daily production of livestock and poultry manure exceeds 10 cubic meters, more equipment is recommended. Generally, an investment of 45,000 to 90,000 USB is required, and a complete set of equipment may cost more than $150,000.

What production site is suitable for my organic fertilizer production plant?

Generally, planning principles of site selection: close to raw materials, convenient site transportation, good infrastructure, try to use the original buildings, reduce the scale of investment, increase the efficiency of capital use, and give full play to the demonstration function of the project. Stay away from residential areas and choose down vents; adapt measures to local conditions, arrange compactly, and make use of abandoned land as much as possible: separate living areas from the factory site and maintain environmental sanitation.

Semi wet material crusher is a new type of high efficiency single rotor reversible crusher. It uses a high-speed rotating blade to crush fibers with good particle size and strong adaptability to material water content. It is especially suitable for making fermented waste powder or other materials with high water content. It has high efficiency, high energy efficiency and crushing effect.

The particle size can reach 20-50 mesh, which can meet the granulation requirements of general fertilizer granulator. The rotor structure of the equipment is novel, the design is reasonable, the operation is simple and the operation is stable. Completely solve the problem of organic matter crushing with high humidity (water content 25% – 50%), which is an environmentally applicable biotechnology promotion project.

Semi wet material crusher is widely used to crush glass, livestock manure, sludge, domestic waste, straw and other raw materials in the manufacturing process of urban domestic waste and organic fertilizer, and hard materials such as ceramics, bricks and gravel. Crush to achieve the effect of safe use.

The semi wet material crusher adopts two groups of rotors in series, so that the materials crushed by the upper rotor are immediately crushed again by the hammer head of the rapidly rotating lower rotor, so that the materials crushed by the upper rotor are immediately crushed. The materials in the inner cavity collide at high speed and smash each other to achieve hammer powder. The powder effect is discharged directly.

The characteristics of semi wet material crusher are mainly reflected in the following aspects:

1. The discharge particle size can be adjusted arbitrarily and is not affected by the wear of vulnerable parts.
2. With large output and low energy consumption, the power consumption can be saved by more than 40% under the same output. It is equivalent to combining two Hammer Crushers into one. The reasonable design combination is wet material crusher, and two sets of rotors are used in series.
3. The semi wet material crusher does not jam, has good concession, high safety factor, will not jam safely, will not affect production in rainy days, and will automatically clean the mud;

4. The hammer head has a long service life. The hammer head used on eight sides can greatly improve the utilization rate, reduce the use cost and reduce the maintenance time.
Semi wet material crusher is an ideal machine for biological fertilizer production and processing units to shorten the production process of organic fertilizer and compost, reduce equipment investment and save operation cost. As an advanced fertilizer mechanism manufacturer in China, we produce different types of fertilizer machines. Welcome to visit and buy.

More details, go to https://fertilizerplantequiment.com/product/semi-wet-material-crusher/

Semi wet material crusher is suitable for crushing the mass after fermentation in the process of organic fertilizer production, and is one of the indispensable crushing equipment in the organic fertilizer production line. At the same time, it is widely used in chemical industry, building materials, mining industry and other industries.

The crusher adopts high strength crack resistant carbide chain plate, and the speed is synchronous during the crushing process. The design of feed and outlet is reasonable, the crushed material is uniform, and it is not easy to stick to the wall and easy to clhatean.

The semi wet material crusher is a single rotor. The main working parts are rotors with steel chains. One end of the chain is connected with the rotor, and the other end of the chain is equipped with a ring chain made of wear-resistant steel. Organic fertilizer crusher is a kind of counter attack crusher, which smashes the block by high speed rotating chain.

Semi wet material crusher always adheres to the high-efficiency development of technology and quality, continuously improves the technical level of the pulverizer, and promotes the market value of the whole equipment industry. The key to the quality of the semi wet material crusher is the quality of the hammer. Hammer head directly contact and impact material, which is most easy to wear.

Therefore, it is of great significance to select the hammer head of semi wet material crusher with good quality for its long-term use. The semi wet material crusher adopts titanium tungsten alloy hammer head. The production technology is based on the production of high manganese steel hammerheads for inlay casting improvement, which greatly improves the toughness and impact resistance of the high manganese steel hammerheads.

Semi wet material crusher plays an important role in shortening the process of organic fertilizer manufacturing and composting, reducing equipment investment and saving operation cost. This machine is an ideal machine for chemical fertilizer production and processing units.

More details, welcome go to https://www.fertilizer-plants.com/fertilizer-grinder/

In recent years, China has made great efforts to develop animal husbandry and put forward zero growth of chemical fertilizer consumption. These policies are undoubtedly a big push for animal husbandry. On the other hand, it is suggested to protect the environment, reduce aquaculture emissions and recycle aquaculture emissions. How to reduce agricultural pollution emissions and increase the recycling of aquaculture resources?

In short, it is necessary to use the organic fertilizer equipment to transform the planting pollution into organic fertilizer, and apply the organic fertilizer back to the crops to realize the complete recycling.
So the purchase of organic fertilizer equipment becomes very important, and the appropriate equipment is very important for the production of organic fertilizer. Here are some tips on how to buy organic fertilizer equipment for you:

1. Determine the size of the equipment: for example, how many tons per year, or how many tons per hour, or how many tons per day?
2. Determine whether the production is powdery or granular organic fertilizer. The investment of powder equipment is generally small. The main equipments include premixing equipment, turnover equipment, refining equipment, organic fertilizer powder packaging equipment, belt conveyor, etc. If the particle is selected, it depends on the shape of the production, whether it is standard spherical or irregular. It depends on the local fertilizer market and farmers’ consumption habits.

3. The choice of granulator, if it is to produce standard spherical granulator, disc granulator, drum granulator, wet granulator, organic fertilizer rapid granulator and so on, all these need supporting drying equipment; If columnar granule is selected, the main equipment includes flat mould granulator, ring mould granulator, etc; If the oblate ball is selected, the main equipment is the roller type extrusion granulator, so there is no need to dry during production. Can use the machine, equipment design is relatively simple.

4. Determine the configuration of equipment: different configuration level, different equipment price, different labor, different production environment.
5. Determine the type of fertilizer to be produced. There are four kinds of organic fertilizer: pure organic fertilizer, organic-inorganic compound fertilizer, biological organic fertilizer and microbial compound fertilizer.

The equipment is different. Pure organic fertilizer has strong adaptability and can be produced by general equipment. Organic and inorganic compound fertilizers depend on different fertilizer formulations. If the total nutrient content is high, the selection of granulator is more demanding.

6. Selection of fermentation overturning machine: General fermentation forms include strip fermentation, shallow fermentation, deep tank fermentation, organic fertilizer fermentation tank, tower fermentation and barrel fermentation. Different fermentation methods and fermentation equipment are different. Generally, the shallow tank turnover machine is more suitable for the principle of aerobic fermentation, and the price is not high, so it is more suitable for the actual situation.

More details, welcome go to https://organicfertilizermachines.com/

NPK fertilizer production with double shaft mixer is the latest technology product developed by Agricultural Machinery Research Institute based on years of experience in design and production of organic fertilizer and NPK compound fertilizer manufacturing process and equipment, which has obtained the national practical patent. It is used for granulation of various organic substances after fermentation, breaking through the conventional organic granulation, without drying and crushing the raw materials before granulation. It can directly process cylindrical particles, which can save a lot of energy.

NPK Drum Granulation Line

Production characteristics of NPK fertilizer with double shaft mixer

(1) The product particles are cylindrical
(2) The content of organic matter can be as high as 100% and made into pure organic particles
(3) The organic particles embedded with each other and growing up under a certain force are used, and there is no need to add adhesive during granulation.
(4) The product has large particles and can be directly screened after granulation to reduce drying energy consumption
(5) After fermentation, the organic matter does not need to be dried, and the moisture content of raw materials can reach 20% – 40%
(6) 4. The stirring blade is welded with hard steel head, with good wear resistance and long service life.

Working principle of NPK fertilizer production with double shaft mixer:

First, a fixed amount of raw powder flows into the mixing tank through the feed port, and then the water is integrated at a certain temperature.
Secondly, a certain length of shaft is used to mix the raw powder through stirring blades to form a core bulge containing certain moisture.
Third, put the core bulge into the ball plate and stir. The whole mixing is divided into atomization area, mixing area and discharging area.

More details, go to https://www.wastetofertilizer.com/bulk-blending-fertilizer-production-line/