My Blog

In the organic fertilizer production industry, there are many types of equipment that can make organic fertilizer, and there are different supporting equipment according to different materials. We use poultry manure as raw material to analyze the two different organic fertilizer production of drum granulator and disc granulator.

The advantages and disadvantages of each granulator.

Disc granulation process characteristics:

The operation is intuitive, and the operation of the equipment can be grasped at any time. If an abnormality is found, the size of the particles can be adjusted in time. It is determined by the inclination and rotation speed of the disc, and the inclination and rotation speed of the disc can be adjusted. The control range of the particle size is wide, the adaptability is strong, and the ball formation rate is very high, which can reach 70% to 90%. The livestock manure organic fertilizer disc granulation process has short production process, simple structure, low investment and easy operation, which is more suitable for small and medium-sized enterprises.

Characteristics of drum granulation process:

Steam is introduced into the material layer in the drum to increase the temperature of the granulated material, dissolve the salt of the granulated material, and achieve a high liquid phase volume under low moisture content to meet the liquid phase volume required for material granulation. At the same time, the amount of evaporated water in the drying process is reduced. The inner wall of the drum is lined with a number of soft rubber plates or polypropylene plates, and there are vent holes at the corresponding positions on the cylinder. When the inner lining turns from the bottom to the upper with the cylinder at the same time, the inner lining sags due to its own weight, thereby causing adhesion The material on the inner lining falls due to gravity to achieve the function of automatically cleaning the conglomerate. During the operation, the operator can observe the ball formation of the material at any time, and take corresponding measures in time as needed to ensure the normal operation of the system.

There are quality pan granulator and rotary drum granulator in FPC. Welcome to our website to buy granulation machines.

FPC disc granulator has the following advantages: high spheroidization rate, high roundness and strength of particles, intuitive operation, convenient maintenance, etc.

The working principle of the disc granulator: The powdered fertilizer is evenly moistened by the atomized water in the double-shaft mixer to form a spherical core with a uniform particle size, and then sent to the spherical disc for granulation. The moisture content of raw materials should be controlled at 12~14%. Most of the water should be added in the double-shaft mixer, and only a small amount of supplemental water should be added to the ball pan, and the supplemental water amount should be controlled at about 0~3%. Dry powder granulation is directly added to the ball-forming disc, and an appropriate amount of water is sprayed. After the raw material ball core enters the ball-forming disc, it moves along a parabola under the action of centrifugal force, friction and gravity in the disc. Due to the cohesiveness and plasticity of the material, the cores adhere to each other and gradually grow up during the movement. When the inclination angle of the ball disc, the high speed of the disc edge and the water content are constant, the material balls of different particle sizes will leave the disc edge and roll down at different detachment angles due to different gravity. The material ball continuously pushes the water out of the surface during the continuous rolling process. Due to the cohesiveness of the material and the natural volatilization of the surface liquid film, the material ball has a certain strength, and then with the rotation of the inclined plate body The edge of the disc is discharged out of the disc.

Stirring-teeth granulator:

The new type of organic fertilizer granulator is also called a spiral stirring tooth structure due to its internal structure , Granulation, spheroidization, densification and other processes, so as to achieve the purpose of granulation. The particle shape is spherical, the particle size is generally between 0.3-3 mm, and the granulation rate is 90%. The size of the particle diameter can be appropriately adjusted by the mixing amount of the material and the spindle speed. Generally, the lower the mixing amount, the higher the rotation speed, and the larger the particle size. Small, and vice versa. Application range: This machine is especially suitable for the granulation of light and fine powder materials. The finer the basic particles of the fine powder material, the higher the sphericity of the particles, and the better the quality of the pellets. It is generally required that the particle size of the material before granulation should be less than 200 mesh. Typical application materials: chicken manure, pig manure, cow manure, carbon black, clay, kaolin, etc.

It is dedicated to the granulation of municipal solid waste organic fermented fertilizer such as manure, compost, green manure, sea manure, cake manure, grass charcoal, soil and miscellaneous manure, three wastes, microorganisms, etc. The particles are spherulites. The granulation rate of the machine is as high as 80-90%, and it is suitable for a variety of different formulas. The compressive strength of organic fertilizer is higher than that of discs and drums. The rate of large balls is less than 15%. The uniformity of particle size can be customized according to user requirements. It is adjusted through the stepless speed regulation function of this machine. This machine is suitable for the direct granulation of organic fertilizer after fermentation, which saves the drying process and greatly reduces the manufacturing cost.

Click here to get cost-effective and efficient granulation machine. https://www.fertilizerplantcost.com/new-type-organic-fertilizer-granulator/

The turning depth of the chain plate turning machine is 1.8-2 meters, and the turning depth of the general rake-tooth turning machine is 0.6-1.5 meters. The chain plate turning machine occupies a small area and is more efficient.

Equipment advantages of chain plate turning machine: this chain type turning pile mixer has the advantages of high crushing efficiency, uniform mixing, thorough pile turning, and long moving distance. New type chain plate compost turning machine has compact structure and advanced technology. It uses some beneficial microorganisms to promote the rapid decomposing of organic waste such as livestock and poultry manure. It adopts unique pond continuous aerobic fermentation technology to make organic waste. The materials are quickly decomposed, dewatered, sterilized, and deodorized to achieve the purpose of harmlessness, resource utilization and reduction treatment, low energy consumption, and stable product quality.

Installation and commissioning of chain plate type stacker machine.

• After all the parts of the chain conveyor equipment are installed and assembled, we need to fix the conveyor chain plates in place to ensure that the legs, columns, and platforms of the conveyor are fixed with chemical anchors. This step is very important. The work is safer only when the equipment is relatively stable, so we must carry out this work well.
• After the last step of the chain conveyor is completed, we should not slack, but also check all the bolts in general, do a thorough fixation to ensure that each screw is fixed. If there is a screw that we do not fasten well, it may cause safety hazards.
• The axis of the chain conveyor, the drive roller and the reversing roller must be vertical to the vertical center line of the frame, otherwise it cannot rotate flexibly, so these three items must be checked clearly , This is also a very important one.
• The chain conveyor should check the tension of the conveyor chain. If the tension to be checked, we need a set of data. The tension should be 1% to 1.5% of the captain. In the meantime, this is more appropriate. We need to keep this data well. If it is out of this range, we have to adjust it in time.
• The chain conveyor has a rope pull switch to be installed on one side of the equipment, and a steel wire rope should be connected between the two switches, and the tightness can be adjusted by yourself.
• There is also a switch on the chain conveyor, which is a deviation switch, which can be installed on both sides of the head and tail, and it is also installed in pairs. The specific position can be according to the instructions.

There many organic compost turner machine in FPC. Welcome to our  website for ideal fermentation machine. https://www.fertilizerplantcost.com/chain-plate-type-compost-turner/

The construction scale of general organic fertilizer production line configuration is generally 5000 tons-100,000 tons per year. It is necessary to comprehensively consider local resources, market capacity, and market coverage.

What is the cost of fertilizer production equipment?

The equipment investment scale and product selection plan of the manure organic fertilizer production line need to be formulated according to the following conditions: raw material resource characteristics, local soil conditions, local planting structure and main crop varieties, and comprehensive consideration of local resources, market capacity, and market coverage radius. Generally, small new factories can produce 10,000 tons (1.5-2.5 tons/hour), 20,000 tons (2.5-3.5 tons/hour), and 30,000 tons (4.5-6 tons/hour) per year. Medium-sized factories are producing 3- 50,000 tons, large factories are producing 50,000-100,000 tons per year. The investment scale and the design of the production line plan need to be formulated according to the characteristics of raw material resources, local soil conditions, local planting structure and main crop varieties, factory site conditions, and the degree of automation of production.

What configurations of the organic fertilizer production line can I buy?

The manure organic fertilizer production line has three configurations: high, medium and low. Large fertilizer plants must adopt a complete set of production configurations, and the appearance and nutrient content of the finished products can meet the market requirements, and they have a greater advantage in the promotion of finished organic fertilizers. The low-to-medium configuration organic fertilizer production line is suitable for small and medium-sized fertilizer factories. The sales scope of finished organic fertilizer is limited to nearby areas. Some processes in the organic fertilizer production process need to be completed manually.

How do I select the fertilizer machines according to the amount of raw materials?

If the daily production of animal manure exceeds 5 cubic meters, and the maximum amount does not exceed 10 cubic meters, you can purchase simple facilities, mainly mobile turning  machines (turning machines), shredders and other facilities, and the cost of investment facilities needs 15,000 to 45,000 USB. Yuan. If the daily production of livestock and poultry manure exceeds 10 cubic meters, more equipment is recommended. Generally, an investment of 45,000 to 90,000 USB is required, and a complete set of equipment may cost more than $150,000.

What production site is suitable for my organic fertilizer production plant?

Generally, planning principles of site selection: close to raw materials, convenient site transportation, good infrastructure, try to use the original buildings, reduce the scale of investment, increase the efficiency of capital use, and give full play to the demonstration function of the project. Stay away from residential areas and choose down vents; adapt measures to local conditions, arrange compactly, and make use of abandoned land as much as possible: separate living areas from the factory site and maintain environmental sanitation.

Belt conveyor is a common equipment used for continuous conveying of goods. There are two types of belt conveyors, fixed and mobile, which are mainly used for loading, unloading, handling and conveying goods or materials. It is the most basic equipment in the manufacturing process of organic fertilizer, which can connect various machines and transport materials. Belt conveyor deviation is one of the common faults in the operation of belt conveyor. There are many reasons for this, including structural design, installation and commissioning. When solving the deviation problem, it needs to be handled flexibly according to the situation.

Harm of belt conveyor deviation

The deviation of belt conveyor means that the conveyor belt deviates from the normal center position to one side of the transmission drum. In this case, if not corrected in time, the edge of the conveyor belt and the frame will rub against each other, and the conveyor belt will wear or even tear over time. In case of serious, the production of nitrogen, phosphorus and potassium fertilizer will stop working, affecting the production efficiency.

Causes of belt conveyor deviation

The reason for belt conveyor deviation is that the forces on both sides of the conveyor belt are unbalanced. If the tension at both ends of the belt is in a balanced state, it is not easy for the newly installed and debugged belt conveyor or the worn old belt conveyor to deviate.

There is a reversing roller at the head and tail of the belt conveyor, which is installed at the head and tail respectively. The head roller is installed and positioned, the central axis is perpendicular to the frame, and the tail roller is equipped with a lead screw as a tensioning device. The perpendicularity between the idler and the frame can be adjusted by adjusting the nut position on the lead screw until the final belt conveyor operates normally.

Organic fertilizer is the main fertilizer to improve crop quality and reduce environmental pollution. The organic fertilizer production line realizes the transformation of high-quality organic fertilizer by reprocessing manure, straw, agricultural wastes and other agricultural wastes.

The heavy use of chemical fertilizer has led to the decrease of soil organic matter content, the serious land consolidation, the increase of crop diseases and the serious yield reduction. Organic fertilizer has no pollution and high fertility in agricultural production and use. Organic fertilizer is the main fertilizer used in agricultural production, which has the characteristics of long-term and lasting effect, activating land, promoting plant growth and increasing yield. Organic fertilizer production line mainly transforms waste into organic fertilizer through fermentation composting and granulation.

Fermentation composting is the first step of organic fertilizer production line. Fecal straw was put into fermentor for high temperature fermentation. After high temperature treatment, bacteria, insects and eggs were removed from compost. The organic matter after fermentation is sent to the equipment of organic fertilizer production line for granulation. Combined application of organic fertilizer and chemical fertilizer can complement each other and improve fertilizer utilization rate.

Chemical fertilizer is a quick acting fertilizer with high nutrient content, less composition and fast release, while organic fertilizer is a long-term fertilizer with high nutrient content but low relative content and slow release. In order to maintain the self-sustaining of nutrients and soil fertility, and strengthen the recycling and reuse of soil nutrients, in the organic fertilizer production line, organic fertilizer and chemical fertilizer can be combined to make organic-inorganic compound fertilizer, which can complement each other. The combination of fertilizer efficiency is more conducive to the absorption of crops, providing nutrients for crops and improving fertilizer utilization rate.

Using two in one organic fertilizer granulator, various organic fertilizers and chemical fertilizers can be mixed and granulated to produce high-quality organic fertilizer. Our factory has designed a large output organic fertilizer production line. The organic fertilizer production line mainly includes two in one granulator, ball mill, drum screening machine, vertical crusher, double shaft mixer, rotary dryer, rotary cooler and packaging machine. Through the deep processing of these equipment, organic matter can become high-quality organic fertilizer.

More details, go to https://organicfertilizerplants.com/

Application of organic fertilizer throughout the year can renew or improve soil organic matter, improve soil physical and chemical properties, and significantly improve soil quality. With the rapid development of modern agriculture, fertilizer is essential. Fertilizer granulation plant sxfp will share with you the key points of rational use of organic fertilizer.

The advantage of organic fertilizer is that it contains a variety of nutrients, including a lot of micronutrients, and contains a lot of organic matter, vitamins and other active substances. The rational use of organic fertilizer should pay attention to the following points:

Pan Granulation Compound Fertilizer Production Line

Long term application of organic fertilizer can renew or increase soil organic matter, improve soil physical and chemical properties, and significantly improve soil quality. However, the disadvantage is that the nutrient content is low, and the nutrient form is mainly organic. It needs to decompose soil microorganisms gradually and transform them into the form of plant absorption and utilization. Because of the low nutrient supply intensity, it is difficult to meet the requirements of rapid growth cycle of high-yield crops. To use good fertilizer, the manufacture should choose a quality fertilizer granulation machine supplier, which will be the first and foremost thing.

In the process of organic fertilizer production, we should not only consider the characteristics of various organic fertilizers, but also consider the application of appropriate fertilizers. That’s what SXFP ALWAYS DO.

Rotary Drum Granulato for npk fertilizer pelleting

In terms of livestock manure, the amount of this organic fertilizer is very large. With the rapid development of livestock and poultry industry, livestock and poultry industry develops rapidly. If animal manure is not treated and applied scientifically, it will not only cause the loss of vegetables, fruit trees, tobacco, tea, potatoes and other economic crops, but also worsen the agricultural environment.

New Type Organic Fertilizer Production Line

Therefore, in the production of cash crops, it is necessary to fully develop and rationally use organic fertilizer. Because the main characteristic of organic fertilizer is that its nutrient content is higher than other organic fertilizers, the carbon nitrogen ratio (C / N) is relatively narrow, usually between 6 and 10.

Therefore, some crushed rice straw was added to form a mixed organic fertilizer, and then other NPK fertilizers were added and granulated by a double roll granulator. In this way, we can clean the environment and ensure the quality and safety of fruit and vegetable products. The application of organic fertilizer can partly replace the supply of nitrogen and phosphorus in crops, thus reducing the application of fertilizer and improving the utilization rate of fertilizer.

Growing crops to fruition could be tricky and folks that are proficient at it realize how to use fertilizer to advance their set goals. They know that the fertilizer they use can produce a big difference for these people. While they are using wet fertilizer materials, they must granulate them in order to use them properly. Knowing how to achieve this will generate the fruit and veggies which they want in great quantities.

When utilizing wet fertilizer materials, they will need to make use of a granulator machine that may be special for wet materials. They are able to do a shopping around experience online to discover the right equipment to use. As this will even permit them to view the difference within the prices, they will be sure for the best deal possible. For all that completes a comparison shop, they are often sure that they may get the ideal equipment with regard to their needs.

New Type Organic Fertilizer Production Line

Fertilizing crops is a big job and depending on how expansive their land is, someone should obtain the help that they can must make sure that all things are moving along as planned. They should enlist the help of a member of family, friend, neighbor, or a hired hand in order to arrive at every one of the crops within a short time. They must ensure they demonstrate to them how grateful they are for the help that they can give them.

This really is important and food and drink are typical an element of the thanking process. Making the most of their crops is the thing that people want. They wish for top level fruits and vegetables they can and that is why they prefer fertiliwer. It’s crucial that they make it easy for the crops to cultivate strong and healthy. When it comes time for harvesting, they may find that they will get what they desire once they treat the plants well. Taking good care of them will ensure that they will get just what they wanted after time.

Welcome to our website and get more information: https://organicfertilizermachines.com/

The granulator of organic fertilizer equipment is an essential machine in the organic fertilizer equipment. Only by doing a good job of maintenance in normal use can its service life be longer. So how to carry out routine maintenance?

1. Check the working condition of each component.

2. Check the organic fertilizer granulator for loose parts.

3. Check the bearing oil temperature to ensure that it is within the normal range.

4. Check that the parts are complete and that they are not worn.

Daily maintenance of organic fertilizer granulator:

1. Firstly, the dirt and sundries on the outside of the granulator are removed, all bearings are cleaned and lubricated, and the friction surfaces are covered with anti-corrosion agents such as paint, black oil and waste engine oil;

2. For the organic fertilizer granulator placed in the open air, those parts which are easy to deform should be leveled or erected to eliminate the factors causing deformation. If there is spring support, the spring should be relaxed;

3. When not working, the parts easy to rust or damage in the organic fertilizer granulator, especially the motor, reducer, conveyor belt, drive chain, should be removed and stored indoors, and separated according to the machine category to prevent deformation or damage caused by mutual extrusion.

More Information: https://fertilizerplantequiment.com/