My Blog

For friends who are preparing to start production of organic fertilizers, there are many things that need to be done, such as project establishment, production plan, process selection, equipment purchase, plant construction, and there may be bidding matters. Since 2020, due to the rising price of raw materials, which has a greater impact on the price of equipment, many friends are very concerned about how much it costs to put into production an organic fertilizer equipment?

First of all, in the case of equipment purchase alone, the price of a set of organic fertilizer production equipment may range from tens of thousands to several million. There are many factors that affect the price of organic fertilizer equipment. Production capacity, raw materials, and equipment selection must also consider the rise and fall of equipment raw materials. Today, I will use two different customer production cases last year to explain the price of the equipment in detail and see which situation is suitable for you.

1. Simple configuration of organic fertilizer equipment to produce fermented organic fertilizer

If the organic fertilizer is produced on a small scale, commercial sales are not required, only the pre-fermentation process is required, and the subsequent deep processing is not required. At present, there are three forms of organic fertilizer fermentation equipment:

1. Choose an organic fertilizer fermentation tank.

Fermentation tank processing organic fertilizer is suitable for the conditions of strict environmental protection requirements and high fermentation aging requirements. At present, the use of fermentation tanks to process organic fertilizer can produce raw materials within 48 hours. The fermentation tank can be equipped with a deodorization system to completely solve the environmental pollution problem. It is not affected by the external temperature and environmental terrain, and can be produced at any time.

2. Adopt small trough type compost turning machine.

The trough-type manure compost turning machine runs stably, and can be changed by one turning-and-turning machine. It can handle multiple trough materials with large output and uniform turning and polishing. Most organic fertilizer processing plants are used. The small 2-meter trough-type turning and polishing machine is only priced at 5 thousand dollars.

3. Use self-propelled compost turning machine.

The self-propelled manure composting machine is divided into wheel type and crawler type. It is characterized by large processing capacity and free movement. It is suitable for organic fertilizer dumping operations in a wide area, and is suitable for organic fertilizer processing plants that do not want to carry out a large amount of civil engineering. The price of the type turning machine is about 10,000 dollars.

2. Simple configuration of equipment for producing powdered organic fertilizer

The production of powdered organic fertilizer is finely pulverized after the fermentation of organic fertilizer. The required equipment: fermentation dumper, forklift silo, semi-wet material shredder, drum screening machine, automatic packaging is called powder organic fertilizer. This low-end configuration of powder organic fertilizer production equipment can be realized at a price of about 30,000-90,000 dollars.

3. Equipment for producing granular organic fertilizer

The production process of granular organic fertilizer is relatively complete and complicated at present, and it is also based on continuous fermentation process and powder organic fertilizer processing. Therefore, the required equipment is relatively more, including fermentation machine, forklift silo, semi-wet material crusher, horizontal mixer, organic fertilizer granulator machine, dryer, cooler, drum screening machine, fertilizer film coating machine and automatic packaging machine. When the process has special needs, dynamic ingredients are also needed. The price of a small complete set of equipment is about $100,000-$140,000.

For professional fertilizer processing enterprises, the production capacity requirements are relatively large. For an organic fertilizer production line with an annual output of 50,000 tons, the equipment price is between $90,000 and $150,000. Such a price range is a reasonable range that takes into account the different needs of different customers.

The above is the approximate price of organic fertilizer production equipment. Since 2021, the price of metals has soared, pushing up the price of equipment, and the specific situation should be based on real-time quotation.

However, in the actual process design, because the production capacity requirements of each project, the ground processing site, and the configuration of the entire set of organic fertilizer production equipment are not fixed, there are often many different situations, so the specific price depends on the situation. FPC will generally provide customers with process design, equipment processing and installation, and production training for free according to the actual situation of the customer. Let customers achieve mass production without any worries.

High-temperature composting technology generally uses aerobic tank fermentation to make compost, and uses a tank turning machine to ferment and turn the pile. For large yields, a roulette turning machine can be used to ferment and turn. It can also be decomposed by strip-chop fermentation, using a crawler turning machine or walking type turning machine. It can ensure enough high temperature to kill the parasites and roundworm eggs, and kill the vegetative cells of pathogenic bacteria, and kill weed seeds, and consume the energy such as carbohydrates in the materials as much as possible, so as not to be applied to the soil in the future. After the middle, it causes undesirable phenomena such as burning roots and seedlings. At the same time, the high temperature has the conditions to consume as much as possible the crude fiber in the feces and the hydrocarbons in the straw. If the hydrocarbons in the crude fiber and straw are not removed, after applying this fertilizer to the soil in the future, one will burn the roots, and the other is because the carbon-nitrogen ratio of this fertilizer is too high, which will cause a large number of microorganisms to heat up. At the same time, it will compete for the nitrogen source in the soil to balance the carbon-nitrogen ratio, which will result in an unfavorable situation of competing with plants for fertilizer, resulting in slender roots and seedlings. At the same time, the use of a trough-type compost turner for fermentation and aerobic fermentation can ensure rapid fermentation and keep farmers in the middle of the two crops. In a short period of time, the straw decomposing process is fully completed.

Wheel type Compost Turner for Large Scale Composting

Fermentation of organic fertilizers is to use chain plate type compost turning machines that can process livestock and poultry manure and strip-type crawler turning and throwing machines to ferment and decompose. The second is to use aerobic fecal fermentation tank for fermentation, which has a short operating period and high processing efficiency. The heat generated by the fermentation in the fermenter rises, which can preheat the upper layer of feces and facilitate the flow of air and the supply of oxygen. The fermentation tank is divided into multiple layers, and each layer can be fermented. After the manure is put into the fermentation tank, the manure is transferred and turned over by the turning of the flap. The operation is simple, the energy consumption is low, and the floor space is small and the maintenance is convenient. The third is that the flap is provided with vent holes, and the flap is directly left with fine slits. The bottom of each layer of fermentation chamber is arranged with air pipes, which improves the aeration capacity, reduces the energy consumption of the fan, and makes the air distribution more uniform. However, it is difficult for the staff to understand the processing conditions of high-temperature fermentation of livestock and poultry manure from the outside. The livestock and poultry manure after high temperature treatment can be slowly dropped to the top of the transfer truck or on the receiving conveyor to complete the automation of the device, and the waste gas generated during fermentation is processed by a dedicated waste gas processor. The exhaust gas treated by the processor meets the emission requirements. The fecal material that has been fermented and decomposed needs to be thoroughly decomposed in the aging field. The aging field is also called the secondary fermentation plant. The secondary fermentation generally takes 5-7 days, and the secondary fermentation time can also be determined according to the production volume. The maximum time should not exceed 20 days. The white mycelium inside the fermentation product and the aroma of distiller’s grains will be produced at the same time. The secondary fermentation field can also be used as a raw material storage field. The pellets made of raw materials that are not fermented and decomposed are easy to swell after bagging.

Granular and powder organic fertilizer production line

Next, the fermented raw materials are crushed, and a special crusher can be used to crush to the granulation requirements, generally 0.5-0.08mm (24-50 mesh). At this time, the crushed raw materials are put into a horizontal mixer for mixing, and humic acid can be added or nitrogen, phosphorus, potassium, reinforcing powder, and organic matter can be added to meet the requirements of the formula and meet the national standards. The agitated raw materials are crushed by a chain pulverizer and then sent to an organic fertilizer granulator for granulation. During granulation, the angle of the granulator and the pressure of the water supply can be adjusted according to the required particle size to form balls, and the ball formation rate can reach 95%.

fertilizer rotary drum granulator

At this time, the manufactured particles are sent to the dryer for drying. The length and diameter of the dryer are determined according to the output. The retention time of particles in the dryer is generally about 30-40 minutes. The particles are dispersed in the dryer through the lifting device to fully absorb heat. The heat is generated by the hot blast stove and sent to the dryer through the induced draft fan to dry the particles, suck away the moisture, and enter the dust removal room. After the gas entering the dust removal room is processed, it meets the air emission requirements, and then is discharged into the atmosphere. This meets the requirements of air environmental protection. At the same time, the dried semi-finished product is sent to the cooler for cooling. The feed temperature is generally 60-80 degrees, and the temperature of the cooled material is generally about 30 degrees. Then the cooled semi-finished product is sent to the sieving machine for screening For classification, the particle size of the finished product is between 2.5-5.5, and the finished particles after sieving are sent to the coating machine.

complete organic fertilizer production line

Send the large over-standard particles and small particles into the chain-type powder mill after stirring to be crushed and re-granulated. Color to achieve customer satisfaction, and the coating agent contains certain nutrients to achieve slow-release purpose). The particles sent into the finished product warehouse are weighed and packaged by an automatic weighing and packaging machine. When weighing, they are bagged according to their own set weight. After sealing, the finished organic fertilizer can be sent to the finished product warehouse or shipped out of the factory.

Detailed production process

Speaking of the small-scale organic fertilizer production line, many people may think that it is the farmer’s homemade organic fertilizer processing method that pollutes the surrounding air and groundwater, but this is not always the case. The reason for this concept is that people’s classification of large, small, and medium-sized organic fertilizer production lines is not clear. According to the general classification standard of organic fertilizer equipment manufacturers. Organic fertilizer production lines with an annual output of less than 20,000 tons are all small-scale organic fertilizer production lines. However, the small-scale organic fertilizer processing technology that pollutes the air and groundwater in the family workshop is only used for small-scale farms or family breeding, and the output is more than 3,000 tons a year. It is caused by no professional rancid treatment and anti-seepage pollution groundwater measures. This will gradually be eliminated. The qualified small-scale organic fertilizer production line covers an annual output of 3,000 tons-an annual output of 20,000 tons, and requires investment in professional organic fertilizer equipment-organic fertilizer turning machines, grinders, granulators, etc. Let’s talk about the production method of this environmentally friendly small-scale organic fertilizer production line.

Powder organic fertilizer production line

The small-scale organic fertilizer production line has the characteristics of convenient materials, low cost, fast recovery cost, low energy consumption, good income-generating efficiency, no pollution, and high organic content. It is an ecological fertilizer processing equipment. Create conditions for improving the soil environment, improving the living environment of farmers and soil water pollution.

The process of the environmentally friendly small-scale organic fertilizer production line generally uses tank fermentation or trough fermentation, and the other is advanced biogas production, which is then fermented into organic fertilizer. This is a relatively common advanced technology for organic fertilizer processing in the market.

Granular and powder organic fertilizer production line

The advanced process methods of the small-scale organic fertilizer production line are as follows:

1. Pile livestock and poultry manure and other materials, household garbage, sludge and other fertilizer base materials on a flat ground in a chopped shape. (The trough turning machine directly puts the material into the trough), the pile width is equal to the turning pile width of the equipment, the height is as high as possible, and the length is as long as possible, such as 50 meters, 100 meters, etc., the ground should be flat, cement, The land can be used (as long as it is level and has a certain degree of hardness), 5-6 acres of space is required for every 10,000 tons produced, and the area ofthe trough turning machine will be relatively small).
2. Sprinkle the piled up livestock and poultry manure and other materials, domestic garbage, sludge and other fertilizer base materials on the biological fermentation inoculants (this unit provides technology and fermentation inoculants).
3. Use a windrow or trough turning machine to mix straw, livestock and poultry manure and other materials, household garbage, sludge, (water content should be 50%-70%), fermentation bacteria, etc., and mix, 3- It can deodorize in 5 hours. In 16 hours, the temperature is raised to 50 degrees. When the temperature reaches 55 degrees, the pile will be turned again to increase oxygen. Afterwards, whenever the temperature of the material reaches 55 degrees, it will start to stir, which has the effect of uniform fermentation, oxygenation and cooling. Repeat the latter process until completely decomposed.
4. If the moisture content of livestock manure and other materials, domestic garbage, sludge, etc. is too high, you can add organic, relatively dry auxiliary materials that can absorb moisture or use the method of recirculation to put the last dried fertilizer underneath to form a chop. Put the livestock and poultry manure and other materials, domestic garbage, sludge, etc., with a large water content in the middle, so that the water on the top can seep to the bottom before being dumped.
5. The general fertilizer process takes 7-10 days. Due to the different climates in different regions, it may take 10-15 days before the material will be completely decomposed, achieving no odor, no germs, eggs, weed seeds, and high humus content. , Increased potassium content, etc. Powdered organic fertilizer is made.
6. The powdered organic fertilizer can then be put into storage and sold by crushing, sieving, screening, automatic fertilizer packing machine and other equipment.

Self Propelled Windrow Compost Turner For Sale

If it is to make powdered organic fertilizer, it can be sold on the market after the above-mentioned preliminary process is completed. As a commodity sales, considering the inventory time and fertilizer efficiency maintenance, etc., it needs to be further processed in the above process and processed into granular organic fertilizer.

When processing granular organic fertilizer, the process of the small-scale organic fertilizer production line adds the following process flow to the above description: ① Use the organic fertilizer granulator to process the particles into 3mm-5mm-8mm and other particles; ② Screening by the sieving machine; ③ After screening, the particles that meet the specifications enter the lower-level process, and those that do not meet the requirements are returned to the pulverizer for reprocessing and re-granulation; it should be noted that the first-time granulation rate of FPC organic fertilizer granulator reaches more than 95%; ④ meets the requirements Transfer to the dryer and cooler for drying and cooling; ⑤ In order to maintain fertilizer, the particles need to be coated, which is the coating process of the film coating machine; ⑥ The coated particles are transported to the automatic weighing and packaging machine for packaging; ⑦ Storage.

Cow Manure Granulation Machine

The above is the current process of organic fertilizer processing that meets environmental protection requirements and meets the organic fertilizer standard, and has undergone a fully decomposed and harmless organic fertilizer processing process. The small organic fertilizer production line has been improved through many years of production practice, with advanced technology, stable production capacity, reliable quality, and excellent equipment performance. It is not only the darling of the domestic market, but also a sweet pastry in the international organic fertilizer production line market.

The organic fertilizer making equipment should be well maintained in the daily use, so as to extend the service life. Let’s look at the maintenance tips of the organic fertilizer pelletizer equipment.

Cow Manure Granulation Machine

• Keep the granulation work site clean. After each use of the organic fertilizer granulation equipment, the bottom should be removed to remove the granulation leaves and residual mortar inside and outside the granulation pot, and clean the mortar and debris scattered or splashed on the organic fertilizer equipment. , Wipe clean the exposed processing surface of the organic fertilizer granulator equipment, paint it with anti-rust paint, and put on the corresponding protective cover to prevent the second intrusion of dust.
• The organic fertilizer producing machine has no external refueling holes, and gears and worm gears are lubricated with special grease for the equipment. The upper gear and the lower gear should be added with triple butter once every season. When refueling, the cover of the dynamic gear box and the cover of the transmission gear can be opened respectively. Weihua oil should be dripped into the sliding surface of the supporting gear box and the hinged joint of the bracket frequently. The worm gear box and bearings have been filled with transmission grease before leaving the factory, but the gearbox machine should be cleaned after each year of use, and all protective lubricants should be replaced.

complete organic fertilizer production line

• Always pay attention to the operation of the organic fertilizer production machine, there should be no serious abnormal noise, and there should be no metal friction sound. If an abnormality is found, it should be stopped immediately and inspected. It can be used after troubleshooting. For the corresponding reason, the machine cannot be started. If there is metal friction sound, check the gap between the granulation pot and the granulation leaf of the organic fertilizer granulator equipment.
• When renewing the granulating pot or granulating leaves of the organic fertilizer pellet equipment, the working gap should be re-measured every time, and the adjustment should be made several times, and it can be used only after it meets the standards.
• If the organic fertilizer machine cannot be operated by pressing the program controller, check the power supply voltage, whether the power plug socket, connection plug socket, etc. are normal, and check the internal fault of the controller.

The chicken manure dryer is an instrument used for the processing and drying of chicken manure, which can improve the environment of the chicken farm and increase the utilization rate of chicken manure. Pure chicken manure organic fertilizer is based on fresh chicken manure as the main raw material. It is refined after thorough de-dusting, purification, high-temperature drying, concentration and crushing, disinfection and sterilization, decomposition and deodorization. It contains a variety of nutrient elements required by crops. It is confirmed by relevant experts that the nitrogen content is 2.6%, the phosphorus content is 3.5%, the potassium content is 2.5%, the crude protein is 16-25%, and the organic matter is 45%.

Chicken Manure Dryer

Chicken manure dryer equipment play a great role in chicken breeding companies. After large-scale experiments, 100Kg fertilization per mu of wheat can increase yield by more than 20%, vegetable fertilization 100Kg per mu can increase yield by more than 30%, fruit tree fertilization 25Kg can increase yield by more than 40%, and watermelon fertilization 100Kg per acre can increase yield by more than 40%. No longer use other fertilizers. The organic fertilizer is a yellow-brown uniform granular product with little pollution, no odor, easy to use, and high fertilizer efficiency, which is beneficial to improve the soil and overcome the salt-alkali damage caused by long-term use of chemical fertilizers. It is suitable for wheat, rice, peanuts, melons and fruit trees and other crops to improve the quality of crops, improve the quality of melons and fruits, and is beneficial to human health. It is a good-quality fertilizer for the cultivation of pollution-free green food. This product can also be used as a feed additive for feeding fish, cattle, pigs, etc.

manure rotary dryer machine in organic fertilizer production line

The demand for chicken manure fertilizer drying equipment is huge, and it has a foothold in many fields. The chicken manure dryer is suitable for large, medium and small chicken farms and areas where the breeding industry is relatively developed. According to the requirements of drying products, it can be used Different heat sources. After filtering and eliminating old products, the era of high power consumption is gone forever. The new type of chicken manure dryer saves energy. This machine is suitable for chicken manure, duck manure, animal manure, slaughter scraps, etc. with a water content of less than 65%. It has a good effect on opening up feed resources, reducing feeding costs, and reducing environmental pollution. The chicken manure drying machine adopts airflow drying method, which has high thermal efficiency. It can complete deodorization and insecticide sterilization of materials at one time without destroying the quality of the finished product. This machine can dry high-temperature materials below the initial moisture content at one time. The final content is less than 14%.

The rapid development of economy and technology has resulted in a wide variety of commodities on the market. How can we purchase suitable organic fertilizer equipment? FPC will help you:

semi wet material crusher fine parts

A look at the appearance of organic fertilizer production equipment

Although buying machines is not like buying clothes, fashion, generosity and beauty are the top priority. However, devices with poor appearance are also rare for their owners. It can also prove that the manufacturer does not care much about the influence of the external image of its own machine, and it must not be a manufacturer that makes people feel at ease to buy products. Therefore, the appearance depends on the buyer’s wishes as a whole!

SEEC chain plate type compost turner for hadling waste

Second look at the assembly of organic fertilizer equipment

Whether the material of the organic fertilizer production line equipment is steel structure. Whether each welding port is welded uniformly and smoothly, and whether there is any cutting corners. Small problems are the easiest to be ignored by people and often bring bad consequences! Universal coupling is the best choice for roller conveyor shaft, because of its compact structure, flexible operation, and easier disassembly and assembly! Another point: organic How about the fertilizer performance? Because the number of equipment in the organic fertilizer making line is different, the size of the particles must be uniform, so this must be clear!

Organic fertilizer production line

Third look at the safety equipment of organic fertilizer equipment

Safety issues must be considered for organic fertilizer equipment, and safety issues cannot be ignored! The organic fertilizer production line must be designed with safety devices. The circuit line selection must meet the standard, and the power of the whole organic fertilizer production machine must be equipped with sufficient and reasonable capacity to expand. In addition to circuit safety issues, the use of safety issues can not be underestimated, must be equipped with professional operating instructions, there must be a dedicated person to guide the use. The safety of the machine operation should be equipped with protective devices and emergency stop switches in case of unexpected accidents.

The actual use of organic fertilizer machinery and equipment is very important. It is because there are so many steps in the use of mechanical equipment, it will become more convenient in actual operation, and it is the use of the machine age, so they will be more important. With the advancement of science and technology, organic fertilizer machinery are now better used.

Whole set machine in bio organic fertilizer production line

There are many fields that have great demand for them, because their use can meet the needs of these fields. As far as agriculture is concerned, many machinery and equipment are used in this field, and organic fertilizer equipment is one of them, which is used to produce organic fertilizer. We know that the agricultural sector has a huge demand for chemical fertilizers, and the growth of crops needs the help of fertilizers so that they can survive better.

The use of organic fertilizer equipment can bring fertilization needs to crops. This equipment is very convenient to use, and they have a strong degree of automation. Therefore, it also brings great convenience to the operator. Similar to many advanced equipment types such as organic fertilizer equipment, such as BB fertilizer equipment and compound fertilizer equipment, their use has a great impact on the agricultural sector.

fertilizer rotary drum granulator

The use of these equipment is also very effective. Their use can conceal the disadvantages of artificial fertilization. We know that waste is prone to occur, and artificial fertilization and fertilization are not balanced, which will also affect the normal growth of crops.

Generally speaking, the use of livestock and poultry manure and industrial waste is 150,000 tons, and the annual production of finished organic fertilizer is about 100,000 tons. What are the configurations of the large-scale livestock and poultry organic fertilizer production line with an annual output of 100,000 tons?

Pig Manure Compost Fertilizer Production Line

Large-scale livestock and poultry organic fertilizer production lines with an annual output of 100,000 tons include: forklift feeder, trough type turner, vertical crusher, drum screening machine, dynamic batching machine, granulator, round thrower, dryer, Cooling machine, coating machine, automatic quantitative packaging scales. Users can customize the appropriate configuration according to their own needs.

Each type of production line has its own characteristics. What kind of organic fertilizer is suitable for what kind of organic fertilizer equipment is needed. For example, the disc and rotating gear production line must be equipped with a dryer and cooler, and use hot air to make the organic fertilizer. Dry, and then use a cold air exhaust system to cool the organic fertilizer, so that the hardness of the particles will be better.

Pan Type Fertilizer Pelletizing Machine

The angle of the granulating disc of FPC disc granulator adopts an integral arc structure, and the granulation rate can reach more than 93%. The pelletizing tray is equipped with three discharge ports, which is convenient for intermittent production operations. The reducer and the motor are driven by flexible belts, which can start smoothly, reduce the impact force of the buffer, and improve the service life of the equipment. The bottom of the pelletizing disc is reinforced with multiple radiant steel plates, which is durable and never deformed. Heavier, thicker, and sturdy base design does not require anchor bolts to fix, and runs smoothly. The main gear of the granulator adopts high frequency quenching, and the service life is doubled. The granulation surface plate is lined with high-strength glass fiber reinforced plastics, which is anti-corrosive and durable.

Self Propelled Windrow Compost Turner For Sale

• Manure compost turner machine: industrialized fermentation treatment of organic solids such as animal manure, domestic garbage, sludge, and crop straws. The equipment fully ferments the uniformity of fermented materials. So that the front of the fermentation tank can be freely put in or taken out of the fermentation method, and wastes such as feces can be retained for a long time.

high moisture materials cruhser effect

• The wet material crusher is a professional crushing equipment for crushing high humidity and multi-fiber materials. Using high-speed rotating blades, crushed fibers have good particle size, high efficiency and high energy. The semi-wet material crusher is mostly used in the production and processing of organic fertilizer, and it has a good effect on crushing raw materials such as chicken manure and sodium humate.

mixng machine

• The mixer has fast mixing speed and good uniformity. It can mix and add 30% viscous materials with liquid. There are two oppositely rotating paddles and rotors when it is working. Because the blade has multiple special angles, it can be mixed quickly and effectively regardless of the shape, size and density of the material. The bottom opening door is adopted for fast unloading speed and less residual quantity.

Pig Manure Granulation Machine

• The organic fertilizer granulator is a molding machine that can make materials into specific shapes. It is widely used in the production of organic fertilizer, bio-organic fertilizer and other fields. According to the structure and working principle, it can be divided into double roller extrusion granulator machine, disc-type granulator, and round shaping granulator machine, new organic fertilizer granulator, etc. For organic fertilizer made from cow dung, we recommend a new type stirring tooth granulator.

Chicken Manure Dryer

• Rotary dryer is mainly composed of rotating body, lifting plate, transmission device, supporting device and sealing ring. Diameter: φ1000-φ4000, length depends on drying requirements. One of the traditional drying equipment is a cylinder that is slightly inclined to the horizontal. The material is added from the higher end, and the high temperature and hot flue gas flows into the cylinder side by side with the material. As the cylinder rotates, the material is due to gravity. Run to the lower end. A copy board is installed on the inner wall of the cylinder to pick up and sprinkle materials. In the process of falling, the material is broken into fine particles by the dispersing device, which increases the contact surface between the material and the airflow, so as to increase the drying rate and promote the advancement of the material. The dried product is collected from the lower part of the bottom end.
• The rotary cooler can reduce the moisture content while cooling to a certain temperature, reduce labor intensity, and increase output. The drum type cooler is driven by the main motor to drive the belt and pulley, which are transmitted to the driving shaft through the reducer, and installed on the driving shaft. The split gears on the upper gear mesh with the large ring gear fixed on the body and work in opposite directions.

Customized Fertilizer Screening Machine in ShunXin

• The drum screening machine adopts a combined screen, which is convenient for maintenance and replacement. The machine has a simple structure, convenient operation and stable operation. The drum screening machine is mainly used to separate the finished product and the returned material, and can also realize the classification of the finished product, so that the finished product is evenly classified.

fertilizer granules coating machine

• The granular fertilizer coating machine is composed of screw conveyor, mixing tank, oil pump, main engine, etc., with powder dusting or liquid coating process, which can effectively prevent the agglomeration of compound fertilizer. The main machine adopts polypropylene lining or acid-resistant stainless steel.

fertilizer single bucket packing machine

• The fertilizer packaging machine is mainly composed of material import, feeding mechanism (gate), weighing hopper, bag clamping mechanism, frame, suction port, pneumatic system, sensor, control box, conveying and sewing mechanism, etc.
• Conveyor: Configure belt conveyor, bucket elevator or screw conveyor according to the actual needs of customers.

What aspects should be paid attention to in FPC large, medium and small organic fertilizer equipment investment? Analyze the price factors of various types of organic fertilizer equipment. In summary, there are seven basic factors that affect the investment price and production of organic fertilizer.

• Determine the size of the organic fertilizer equipment. For example, how many tons are produced per year, or how many tons are produced per hour, can the price be determined.
• Determining the shape of the particles is what kind of granulator to choose. It is powdery, columnar, oblate or standard round. Commonly used equipment for granulating organic fertilizers are: disc granulator, drum granulator, wet granulator, roller extrusion granulator, flat die granulator, ring film granulator. The selection of the granulator should be decided according to the local fertilizer sales market. The particle shape is different, the process of the organic fertilizer equipment is also different, and the price of the organic fertilizer equipment is also different.

Pig Manure Granulation Machine

• Determine the configuration level of organic fertilizer equipment. The level of configuration is different, the price of organic fertilizer equipment is different, the amount of labor used is different, and the stable and high yield of organic fertilizer equipment is also different: generally higher configuration, automatic batching device, automatic packing device, automatic quantitative feeding device, water Screen dust removal and so on.
• Determine the type of fertilizer produced. It is compound fertilizer equipment or organic fertilizer equipment. For the same output, organic fertilizer equipment generally takes into account the high water content and the strains are not resistant to high temperatures. The model is generally larger than the compound fertilizer model. There are four types of general organic fertilizers, pure organic fertilizer, organic-inorganic compound fertilizer, biological organic fertilizer, compound microbial fertilizer, and the organic fertilizer equipment is different for different varieties.
• Selection of fermentation turning machine. The general fermentation forms include stack fermentation, shallow fermentation, deep tank fermentation, tower fermentation, and rotary drum fermentation. The fermentation methods are different, and the fermentation organic fertilizer equipment is also different. Generally, aerobic fermentation with a shallow trough turning machine is used (the advantages of a shallow trough turning machine: conform to the principle of aerobic fermentation, not easy to form anaerobic, fully complete fermentation, and fast fermentation).

Wheel type Compost Turner for Large Scale Composting

• Determine the level of environmental protection requirements. Places with low environmental protection requirements generally choose to reduce dust and reduce the investment in organic fertilizer equipment. Places with high environmental protection requirements generally choose heavy dust removal and ink dust removal, which can meet the air emission quality standards.
• The price of each model varies according to the required degree of automation. The price of equipment with high degree of automation is correspondingly high, but it can save manpower.