My Blog

My WordPress Blog

How to Do the Maintenance of Organic Fertilizer Granulation Equipment in Use?

How to Do the Maintenance of Organic Fertilizer Granulation Equipment in Use?

The organic fertilizer making equipment should be well maintained in the daily use, so as to extend the service life. Let’s look at the maintenance tips of the organic fertilizer pelletizer equipment.

Cow Manure Granulation Machine

  • Keep the granulation work site clean. After each use of the organic fertilizer granulation equipment, the bottom should be removed to remove the granulation leaves and residual mortar inside and outside the granulation pot, and clean the mortar and debris scattered or splashed on the organic fertilizer equipment. , Wipe clean the exposed processing surface of the organic fertilizer granulator equipment, paint it with anti-rust paint, and put on the corresponding protective cover to prevent the second intrusion of dust.
  • The organic fertilizer producing machine has no external refueling holes, and gears and worm gears are lubricated with special grease for the equipment. The upper gear and the lower gear should be added with triple butter once every season. When refueling, the cover of the dynamic gear box and the cover of the transmission gear can be opened respectively. Weihua oil should be dripped into the sliding surface of the supporting gear box and the hinged joint of the bracket frequently. The worm gear box and bearings have been filled with transmission grease before leaving the factory, but the gearbox machine should be cleaned after each year of use, and all protective lubricants should be replaced.

complete organic fertilizer production line

  • Always pay attention to the operation of the organic fertilizer production machine, there should be no serious abnormal noise, and there should be no metal friction sound. If an abnormality is found, it should be stopped immediately and inspected. It can be used after troubleshooting. For the corresponding reason, the machine cannot be started. If there is metal friction sound, check the gap between the granulation pot and the granulation leaf of the organic fertilizer granulator equipment.
  • When renewing the granulating pot or granulating leaves of the organic fertilizer pellet equipment, the working gap should be re-measured every time, and the adjustment should be made several times, and it can be used only after it meets the standards.
  • If the organic fertilizer machine cannot be operated by pressing the program controller, check the power supply voltage, whether the power plug socket, connection plug socket, etc. are normal, and check the internal fault of the controller.

Leave a Reply

Your email address will not be published. Required fields are marked *