My Blog

Pay attention to the time of fertilization

Organic fertilizer is slow to use, so it should be applied as early as possible. It is usually used as the base fertilizer before sowing or sowing, and fermentation will be better before use. The latter is less effective than the basic fertilizer.

Fertilizer has a quick effect, and should be used as base fertilizer one week in advance. Fertilizer should be applied before the critical period of crops or during the peak period of nutrient absorption to meet their needs.

How to make organic fertilizer, here are complete systems for your reference, https://organicfertilizermachines.com/organic-fertilizer-production-line/

Biological fertilizer plays an important role in inhibiting bacteria in soil. Therefore, under the premise of bacteria having reproductive growth time, it should be applied early, which can be applied with organic fertilizer for soil or during implantation or implantation before application.

NPK Drum Granulation Line

Second, pay attention to the application method

The main function of organic fertilizer is to improve the soil and provide nutrients, which is usually used as the basic fertilizer in the soil. Therefore, the organic fertilizer and soil should be mixed evenly with the deep plough to achieve the purpose of improving the soil. It can also be used in combination with microbial agents for acid-base reproduction, which will improve the soil environment, balance nutrition and increase the structure of soil aggregates. To make fertilizer met the requirements, it is necessary to select a realiable organic fertilizer machine manufacturer.

In the basic fertilizer, because the nutrients in the organic fertilizer are mainly nitrogen, it can reduce the nitrogen fertilizer in the organic fertilizer, the base fertilizer can use 30%, the rear fertilizer can use 70%. Phosphate fertilizer and potassium fertilizer can be paid off as base fertilizer at one time. The fluidity of phosphate fertilizer is poor, and the recovery effect is poor in the later stage. Therefore, the phosphate fertilizer should be applied to the soil as the base fertilizer.

To make compound fertilizer, here are machines for your reference:https://organicfertilizermachines.com/compound-fertilizer-production-line/

The best way to apply the fertilizer is to use the full solution quick acting fertilizer, such as the source Bank of P and K, which can be absorbed quickly after the decomposition of vegetables, which has little influence on the soil. Biomass fertilizer can be concentrated in planting sites or based on organic fertilizer because of its small quantity. The latter can be used to produce long bacteria by using the same kind of biological fertilizer to improve the removal ability and disease prevention effect of phosphorus and potassium solution.

Finally, pay attention to the dose

Different crops have different growth stages. The amount of fertilizer is different, so the amount of fertilizer should be controlled, and the fertilizer should be applied according to the different needs of plants, and the content of nutrient elements in soil should be considered comprehensively
Reasonable collocation of chemical fertilizer.

We can arrange engineers to go to the customer factory or workshop to check the situation on site, and then make the production layout drawings for the customers.

We provide installation and maintenance for overseas engineers.
For the construction of customers, we can provide construction drawings for free.

When customers visit China to check our factories, we can take our machines to our fertilizer plants, including roller pressing granulation production line, organic fertilizer production line, NPK compound fertilizer production line.

China is a big consumer of chemical fertilizer. The production of chemical fertilizer consumes a lot of resources, such as coal and electricity, causing serious damage to the environment. At present, the country is accelerating the transition to green energy development.

Using fertilizer granulator to produce granular organic fertilizer can effectively improve soil and soil nutrients, protect the environment, and bring huge social benefits.

What are the characteristics of the organic fertilizer production line? This is a short summary:

Pan Granulation Compound Fertilizer Production Line

1. Organic fertilizer has wide applicability. It is suitable for manure, sludge, straw, charcoal and other coarse fiber organic fertilizer. It can be granulated directly when the moisture is about 30%.
2. The granulator of organic fertilizer production line has the advantages of low operation cost, no need of drying, crushing and other processes, high ball formation rate and high survival rate of biological bacteria.

Process characteristics of Zhengzhou sx in one organic fertilizer production line
The process flow of organic fertilizer production line generally includes: batching, mixing, granulation, drying, cooling, packaging, etc.
The equipment layout design is reasonable, which effectively reduces the energy consumption. The whole set of equipment has high stability and low maintenance cost. The granulation rate of organic fertilizer production line is very high. It can produce various concentrations of organic fertilizer and compound fertilizer.
Zhengzhou SX organic fertilizer production line can meet the requirements of customers, can meet the production capacity of 10000 to 100000 tons of equipment. It uses non drying room temperature process to produce molding and granulation, with high efficiency and low investment.

More detailed info, go to https://www.wastetofertilizer.com/fertilizer-granulation-plant/

Bio organic compost production line is a kind of compost which has the function of both microbial compost and organic compost. It is composed of specific functional microorganisms and organic matter, mainly used to remove plant residues (such as livestock manure, crop straw, etc.) After harmless treatment and decomposition.

The production method and operation process of bio organic compost are as follows:

1. The first step in the production process of bio organic compost: the total dosage of selected strains is 0.2% – 0.5%.
2. Production process of bio organic compost: preparation and requirements of raw and auxiliary materials:
3. Main ingredients: fruit residue, dry bagasse, edible fungus residue, distiller’s grains, sugar residue, vinegar residue, starch residue, cassava residue, citric acid residue, soy sauce residue, monosodium glutamate residue, powder residue, bean curd residue, drug residue, oil residue, oil cake, bran, cottonseed meal, moldy feed, sludge, brewery’s residue, slaughterhouse residue, Ho water (s water), Leftover food, human and animal manure and other materials.

How to turn theses machines into bio composts, go to https://compostturnermachine.com/bio-composter-machine/

1. Auxiliary materials: all kinds of crop straws, leaves and weeds, melons and vines, straw, pine hull, peanut hull, sawdust, rice husk powder, rice bran, etc. can be dried, crushed and made into high carbon.
2. The proportion of main materials and auxiliary materials is 5:1-3:1.
3. The production process of bio organic compost production line is divided into three steps: the water content should be controlled at 60-65%, and the water can only come out by hand holding materials in groups. Bacteria, main materials and auxiliary materials should be mixed evenly. The ambient temperature should be higher than 15 ℃. The stacking area of materials shall not be less than 4 square meters, the width shall be 1.5-2 meters, the height shall be 0.6 meters, and the length shall not be limited.
4. The production process of bio organic compost is divided into four steps: composting should be turned at 50 ℃ once a day. If the chimney temperature exceeds 65 ℃, it will be overturned again. The temperature will be controlled below 70 ℃. The temperature of composting will be lower, the material will be loose, the material will not have the original smell, and there will be a little ammonia smell. White hyphae are produced in the pile and decompose.

Organic fertilizer production equipment should be kept in daily use to extend its service life. Let’s take a look at the skills of maintaining the organic fertilizer production equipment:

1. Keep the work site clean. After each experiment on the organic fertilizer manufacturing equipment, the particle leaves and residual mortar inside and outside the granulating pot should be cleaned, and the mortar and flying objects falling on or scattered on the organic fertilizer equipment should be cleaned. Wipe the exposed processing surface clean, apply anti rust meat paint, and cover the corresponding protective cover to prevent the second invasion of dust.

Pan Granulation Compound Fertilizer Production Line

2. There is no external oil filling hole for the organic fertilizer equipment needed for the production of biological fertilizer, and the gears and worm gears are lubricated with special grease for the organic fertilizer equipment. Top and bottom should be triple buttered every season. When refueling, the dynamic transmission cover and the transmission cover can be opened respectively.

The lubricating oil should drip into the sliding surface of the supporting gearbox and the hinge joint of the bracket frequently. The worm gear box and bearing are filled with enough transmission grease at the factory, but the machine of the gear box should be cleaned and all protective lubricants should be replaced after using once a year.

3. Always pay attention to the operation of organic fertilizer machine. There should be no serious abnormal sound or metal friction sound. If any abnormality is found, please stop using immediately and check. Use it after troubleshooting. No corresponding check was found. Cause the machine cannot be started.

If there is metal friction sound, please first check the clearance between the granulator and the granulator blade of the organic fertilizer equipment.

4. Regularly check the standard clearance between granulating pans.

5. When replacing the pelletizing pot or blade of organic fertilizer barrel, the working clearance should be re measured and adjusted for many times. It can only be used after meeting the standard.

6. If it is impossible to operate the organic fertilizer machine by pressing the program controller, please check whether the power supply voltage, power plug and socket, connecting plug and socket are normal, and check the internal fault of the controller.

The above is the maintenance work of the organic fertilizer equipment we introduced. Only by doing this, can the service life of the equipment be extended, and the equipment be used more smoothly. More detailed info go to https://organicfertilizerplants.com/

Application of organic fertilizer throughout the year can renew or improve soil organic matter, improve soil physical and chemical properties, and significantly improve soil quality. With the rapid development of modern agriculture, fertilizer is essential. Fertilizer granulation plant sxfp will share with you the key points of rational use of organic fertilizer.

The advantage of organic fertilizer is that it contains a variety of nutrients, including a lot of micronutrients, and contains a lot of organic matter, vitamins and other active substances. The rational use of organic fertilizer should pay attention to the following points:

Pan Granulation Compound Fertilizer Production Line

Long term application of organic fertilizer can renew or increase soil organic matter, improve soil physical and chemical properties, and significantly improve soil quality. However, the disadvantage is that the nutrient content is low, and the nutrient form is mainly organic. It needs to decompose soil microorganisms gradually and transform them into the form of plant absorption and utilization. Because of the low nutrient supply intensity, it is difficult to meet the requirements of rapid growth cycle of high-yield crops. To use good fertilizer, the manufacture should choose a quality fertilizer granulation machine supplier, which will be the first and foremost thing.

In the process of organic fertilizer production, we should not only consider the characteristics of various organic fertilizers, but also consider the application of appropriate fertilizers. That’s what SXFP ALWAYS DO.

Rotary Drum Granulato for npk fertilizer pelleting

In terms of livestock manure, the amount of this organic fertilizer is very large. With the rapid development of livestock and poultry industry, livestock and poultry industry develops rapidly. If animal manure is not treated and applied scientifically, it will not only cause the loss of vegetables, fruit trees, tobacco, tea, potatoes and other economic crops, but also worsen the agricultural environment.

New Type Organic Fertilizer Production Line

Therefore, in the production of cash crops, it is necessary to fully develop and rationally use organic fertilizer. Because the main characteristic of organic fertilizer is that its nutrient content is higher than other organic fertilizers, the carbon nitrogen ratio (C / N) is relatively narrow, usually between 6 and 10.

Therefore, some crushed rice straw was added to form a mixed organic fertilizer, and then other NPK fertilizers were added and granulated by a double roll granulator. In this way, we can clean the environment and ensure the quality and safety of fruit and vegetable products. The application of organic fertilizer can partly replace the supply of nitrogen and phosphorus in crops, thus reducing the application of fertilizer and improving the utilization rate of fertilizer.