My Blog

Semi wet material crusher is suitable for crushing the mass after fermentation in the process of organic fertilizer production, and is one of the indispensable crushing equipment in the organic fertilizer production line. At the same time, it is widely used in chemical industry, building materials, mining industry and other industries.

The crusher adopts high strength crack resistant carbide chain plate, and the speed is synchronous during the crushing process. The design of feed and outlet is reasonable, the crushed material is uniform, and it is not easy to stick to the wall and easy to clhatean.

The semi wet material crusher is a single rotor. The main working parts are rotors with steel chains. One end of the chain is connected with the rotor, and the other end of the chain is equipped with a ring chain made of wear-resistant steel. Organic fertilizer crusher is a kind of counter attack crusher, which smashes the block by high speed rotating chain.

Semi wet material crusher always adheres to the high-efficiency development of technology and quality, continuously improves the technical level of the pulverizer, and promotes the market value of the whole equipment industry. The key to the quality of the semi wet material crusher is the quality of the hammer. Hammer head directly contact and impact material, which is most easy to wear.

Therefore, it is of great significance to select the hammer head of semi wet material crusher with good quality for its long-term use. The semi wet material crusher adopts titanium tungsten alloy hammer head. The production technology is based on the production of high manganese steel hammerheads for inlay casting improvement, which greatly improves the toughness and impact resistance of the high manganese steel hammerheads.

Semi wet material crusher plays an important role in shortening the process of organic fertilizer manufacturing and composting, reducing equipment investment and saving operation cost. This machine is an ideal machine for chemical fertilizer production and processing units.

More details, welcome go to https://www.fertilizer-plants.com/fertilizer-grinder/

Animal manure is a kind of high quality organic fertilizer, known as the “king of organic fertilizer”. Manure has good long-term fertility, ventilation, drainage and water retention, and comprehensive nutrients. It not only contains nitrogen, phosphorus, zinc and other elements, but also contains iron, manganese, zinc, copper, magnesium and other trace elements and 18 kinds of amino acids. The content of organic matter and humus can reach about 30%. At the same time, there are about 100 million beneficial bacteria per gram. What’s more valuable is that they contain antagonistic microorganisms and unknown auxin. Through the role of probiotics, it can effectively inhibit the growth of pathogenic bacteria in soil and inhibit the occurrence of soil borne diseases. So how to use animal manure to produce organic fertilizer?

One is raw material fermentation

Firstly, the required materials are mixed, and tank aerobic fermentation process or strip composting fermentation can be used to make the materials soft. After fermentation and decomposition of raw materials, harmful microorganisms and insect eggs in raw materials can be killed in the high temperature stage of fermentation to prevent their adverse effects on the growth of animals. The quality of raw material fermentation is directly related to the yield of animals, so we must pay attention to it.

After the trampoline is finished, put the fermented materials on the trampoline and stack them about 20 cm high. Each square can raise 1-2 million animals, and feces and cockroaches can be collected every 10 days.

New Type Organic Fertilizer Production Line

Collection of feces

Faeces are usually collected at the same time as animals are harvested. The collection of feces is mainly based on the characteristics of being afraid of the sun. First of all, put cockroaches and feces in a sunny place and keep drilling down, so that you can collect sputum layer by layer. The second is to use mechanical separation method to separate sputum, feces and mechanical separation method, and then collect sputum.

Animal manure fermentation

The fermentation tank is used for continuous fermentation of sputum, and feces are mixed with fermentation bacteria. The excrement in the tank is turned by the dumper once a day, and the fresh excrement is fed from the side of the tank, and the fermentation is completed. The material is sent out from the other end of the groove.

Fecal dryness

The moisture content of the harvested feces is about 40%. Generally, natural drying method and artificial drying method are used.

At this time, feces can be used directly. If you want to make more money, you can also use the organic fertilizer production equipment for further granulation and packaging of feces.

More details, go to https://manurefertilizermachine.com/

The granulator granulates better quality particles, users can external vacuum cleaner, meet the requirements of environmental protection.
This new two in one organic fertilizer granulator is used in the 200 t / D organic fertilizer combination granulation production line with a production capacity of 1-20 T / h.

Pan Granulation Compound Fertilizer Production Line

It is a two in one granulator for organic fertilizer and compound fertilizer, so it is also used in the 200 t / D compound fertilizer combination granulation production line.

Its working powder is 42.6 to 80 kW, easy to clean the inner wall of the shell. Working principle: the material first enters the first granulation section from the uniform feeding section, and then is prepared for granulation through the high-speed adjustable mixing knife, and then pushed to the second granulation section.

Granulation material in the secondary granulation section, through the internal mixed teeth secondary granulation and outer cylinder forming, to achieve the purpose of granulation, so that the particles have better quality assurance.

We have designed the suction and discharge ports in the silo, users can connect the vacuum cleaner to meet the environmental emission requirements. We also designed the nozzles for observation doors and spray pipes. Users can spray liquid into the particles in the roller according to the particle size requirements.

More details, welcome go to https://fertilizergranulatormanufacturer.com/

Bio organic compost production line is a kind of compost which has the function of both microbial compost and organic compost. It is composed of specific functional microorganisms and organic matter, mainly used to remove plant residues (such as livestock manure, crop straw, etc.) After harmless treatment and decomposition.

The production method and operation process of bio organic compost are as follows:

1. The first step in the production process of bio organic compost: the total dosage of selected strains is 0.2% – 0.5%.
2. Production process of bio organic compost: preparation and requirements of raw and auxiliary materials:
3. Main ingredients: fruit residue, dry bagasse, edible fungus residue, distiller’s grains, sugar residue, vinegar residue, starch residue, cassava residue, citric acid residue, soy sauce residue, monosodium glutamate residue, powder residue, bean curd residue, drug residue, oil residue, oil cake, bran, cottonseed meal, moldy feed, sludge, brewery’s residue, slaughterhouse residue, Ho water (s water), Leftover food, human and animal manure and other materials.

How to turn theses machines into bio composts, go to https://compostturnermachine.com/bio-composter-machine/

1. Auxiliary materials: all kinds of crop straws, leaves and weeds, melons and vines, straw, pine hull, peanut hull, sawdust, rice husk powder, rice bran, etc. can be dried, crushed and made into high carbon.
2. The proportion of main materials and auxiliary materials is 5:1-3:1.
3. The production process of bio organic compost production line is divided into three steps: the water content should be controlled at 60-65%, and the water can only come out by hand holding materials in groups. Bacteria, main materials and auxiliary materials should be mixed evenly. The ambient temperature should be higher than 15 ℃. The stacking area of materials shall not be less than 4 square meters, the width shall be 1.5-2 meters, the height shall be 0.6 meters, and the length shall not be limited.
4. The production process of bio organic compost is divided into four steps: composting should be turned at 50 ℃ once a day. If the chimney temperature exceeds 65 ℃, it will be overturned again. The temperature will be controlled below 70 ℃. The temperature of composting will be lower, the material will be loose, the material will not have the original smell, and there will be a little ammonia smell. White hyphae are produced in the pile and decompose.

Organic fertilizer production equipment should be kept in daily use to extend its service life. Let’s take a look at the skills of maintaining the organic fertilizer production equipment:

1. Keep the work site clean. After each experiment on the organic fertilizer manufacturing equipment, the particle leaves and residual mortar inside and outside the granulating pot should be cleaned, and the mortar and flying objects falling on or scattered on the organic fertilizer equipment should be cleaned. Wipe the exposed processing surface clean, apply anti rust meat paint, and cover the corresponding protective cover to prevent the second invasion of dust.

Pan Granulation Compound Fertilizer Production Line

2. There is no external oil filling hole for the organic fertilizer equipment needed for the production of biological fertilizer, and the gears and worm gears are lubricated with special grease for the organic fertilizer equipment. Top and bottom should be triple buttered every season. When refueling, the dynamic transmission cover and the transmission cover can be opened respectively.

The lubricating oil should drip into the sliding surface of the supporting gearbox and the hinge joint of the bracket frequently. The worm gear box and bearing are filled with enough transmission grease at the factory, but the machine of the gear box should be cleaned and all protective lubricants should be replaced after using once a year.

3. Always pay attention to the operation of organic fertilizer machine. There should be no serious abnormal sound or metal friction sound. If any abnormality is found, please stop using immediately and check. Use it after troubleshooting. No corresponding check was found. Cause the machine cannot be started.

If there is metal friction sound, please first check the clearance between the granulator and the granulator blade of the organic fertilizer equipment.

4. Regularly check the standard clearance between granulating pans.

5. When replacing the pelletizing pot or blade of organic fertilizer barrel, the working clearance should be re measured and adjusted for many times. It can only be used after meeting the standard.

6. If it is impossible to operate the organic fertilizer machine by pressing the program controller, please check whether the power supply voltage, power plug and socket, connecting plug and socket are normal, and check the internal fault of the controller.

The above is the maintenance work of the organic fertilizer equipment we introduced. Only by doing this, can the service life of the equipment be extended, and the equipment be used more smoothly. More detailed info go to https://organicfertilizerplants.com/

Organic fertilizer material crusher is the crushing process equipment of organic fertilizer production line. There are many types of organic fertilizer material crusher, such as vertical and horizontal, but the main function is high humidity material crushing. The selection of organic fertilizer material crusher mainly considers the output, discharge and dust reduction. The effect of organic fertilizer processing line should also be considered. According to the actual situation, to buy shredder.

Most of the organic wastes used in the facilities of organic fertilizer production equipment are perishable substances, so in the collection and transportation stage, even if the closed carrier is used, odor will be generated when unloading in the raw material storage and storage places.

Vertical Fertilizer Material Crushing Machines

In addition, odors and dust will be generated in raw materials, auxiliary materials, composting sites, and platforms between fermentation facilities where trucks go in and out. Although rice husk, sawdust and other auxiliary materials will not produce odor, they will produce dust in the process of unloading raw materials.

In addition, when using the grinder to crush the rice husk, the process of moving the rice husk to the storage tank, around the grinder, and when the crushed rice husk is transported, dust and water vapor will also be produced. In the process of crushing and pruning, if the shearer is used, no dust will be produced, but if the high-speed rotary crushing and air conveying are used for crushing and pruning, a considerable amount of dust and noise will be produced.

In the agricultural organic fertilizer production equipment, when all kinds of raw materials are put into the mixer, especially when the compost return material with small water content and the mixed raw materials are discharged, the odor and dust will also be produced.