Brief introduction of BB fertilizer production process:
1. The nitrogen, phosphorus, potassium, filler and other raw materials are transported to the relevant silos.
2. After weighing by each automatic metering device, it is sent to the premixer.
3. It is transferred to the horizontal BB fertilizer mixer (intermittent and continuous), the particles rotate through the horizontal BB fertilizer mixer to form an irregular curtain, and the evenly mixed particles incline slowly along the direction of the mixer. The discharge port rolls.
4. Transfer to the finished product bin, slide into the automatic packaging scale for weighing, packaging and warehousing.
The key to the production of BB fertilizer (mixed fertilizer) is as follows:
Follow the rules of chemical compatibility.
1. After mixing different base fertilizers, some reactions will reduce the critical relative humidity (CRH) and make the products absorb moisture and agglomerate. For example, urea and ammonium nitrate cannot be mixed directly. Because the CRH of the mixture is only 18.1%, most areas will absorb moisture, and some reactions will even cause nutrient loss, such as ammonium nitrogen (ammonium nitrate, ammonium sulfate, ammonium phosphate, etc.).
It should be mixed with alkali fertilizer with strong chemical activity (such as hot phosphorus fertilizer and potassium fertilizer) to avoid the loss of ammonium nitrogen (NH4-N). The addition of neutralizing agent (such as limestone, dolomite powder, etc.) in the mixed fertilizer also caused nitrogen loss.
2. Superphosphate and ammonium nitrate are mixed to form calcium nitrate [Ca (NO3) 2], which makes BB fertilizer (mixed fertilizer) viscous.
3. When superphosphate is mixed with urea, crystal water will precipitate, but ammoniated superphosphate can be mixed with ammonium phosphate to obtain stable synthetic fertilizer. Ammonium superphosphate is mixed with ammonium nitrate or urea and chlorinated. The product made from potassium is more dry and has better fluidity than that made from granular calcium.
The dry liquid mixed fertilizer with nutrient concentration more than 50% can be obtained by using ammonium phosphate formula, and the qualified calcium phosphate is only 25% ~ 31%. Calcium is mixed with ammonium sulfate. It starts to heat up, then it settles, the water gets wet and forms a hard lump.
Strictly use of grain based fertilizer to reduce secondary separation
1. The strength of basic granular fertilizer should be guaranteed first. Its static strength should not be less than 2 × 106pa, can bear the extrusion, friction and other external forces in the production process without pulverization.
2. The grain size range of each base fertilizer is – 6 + 16 mesh, and the dosage of each material is between 25% and 45%. When the difference of the middle particle size of different components is less than 10%, the mixture will not be separated again. In addition, the turbulence and storage in the mixing process are reduced, and the soft mixing is realized, which can effectively reduce the segregation and secondary separation of the mixed products. More details, go to https://www.fertilizer-plants.com/fertilizer-blender/