It is inevitable that machine for making organic fertilizer will have problems when it is used, and if there is a problem, it must be repaired. But there are some things to pay attention to when repairing, otherwise the damage to the machine itself will be very serious. Next, let’s introduce some matters that need to be paid attention to when repairing organic fertilizer equipment.
- The method of supporting the vehicle is improper. For example, when the tire of the organic fertilizer equipment is damaged or replaced, use bricks, stones, wood blocks or a single jack to support it. The correct way is to use jacks and strong wooden piers to pad up the frame at the same time, and the front and rear wheels should be blocked with triangular wood or larger stones to prevent the vehicle from moving forward and backward and the support from falling down and hurting people. This kind of maintenance is best carried out on a solid level ground to prevent it from falling over and hurting people.
- The tire inflation operation is incorrect. The tire is reinflated after disassembly and assembly, without protection, causing the steel ring to pop out and injure people. The correct method is to lock the tire, lock ring, and retaining ring together with a chain lock before inflation; you can also inflate the side of the retaining ring toward the ground or wall to prevent the rim from popping out and hurting people.
- The residual oil is not cleaned from the welding oil container. For welding repair oil containers, the residual oil in the container must be cleaned beforehand, otherwise it will cause an explosion during welding. The cleaning method is to use alkaline water or hot water to add vinegar, repeatedly cleaning 2-3 times, and control and dry before applying welding. It cannot be blown dry with high-pressure air to prevent electrostatic sparks from detonation. When welding, open all box covers first. When cleaning large oil tanks such as organic fertilizer making machinery and agricultural machinery, people who enter the tank must wear long-sleeved clothes, and also wear protective belts and signal ropes. The working time inside the tank should not be too long, and there must be someone to look after it outside the tank. Personnel should wash their faces, hands, and mouth after getting out of the tank, and wash their clothes with alkaline water and then with clean water.
- Ignore safety when debugging the engine. When debugging the machine, people approach dangerous parts such as fans, transmission belts, or exhaust pipes, or drop tools or parts on the machine to injure people or damage the machine. Stop the machine as much as possible during commissioning. The lower part of the machine must be turned off during commissioning. Special personnel should be sent to guard the operating mechanism if it is on fire to prevent outsiders from operating agricultural machinery such as organic fertilizer equipment. After debugging, check tools and parts before starting, and send out signals.
The above are the matters needing attention in the maintenance of organic fertilizer processing machine. You need to know more about it. After all, the machine will inevitably be damaged if it is used more often. So this is also to remind everyone to pay more attention to the machine when using it.